DEUKYX-193-4110_G5S2_VOL4.pdf - 第248页
DEUKYX 3-70 193-41 10 3.5 T ray-Feeder (Block2) Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 441608 Tray Feeder Zeroing Error (Block2) T raverse pallet store error ----- 441609 Tray Feeder Zeroing Err…
DEUKYX
3-69193-4110
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
441403 Tray Pallet Draw out Error (Block2)
Traverse wave form setting error
-----
441404 Tray Pallet Draw out Error (Block2)
Traverse operating error
-----
441405 Tray Pallet Draw out Error (Block2)
Traverse operating error
-----
441406 Tray Pallet Draw out Error (Block2)
No palette when drawing out begins.(B15411)
-----
441407 Tray Pallet Draw out Error (Block2)
Cannot detect the pallet to pull out(B15505, B15506)
Prüfen Sie, ob die Palette im Magazin richtig eingerichtet ist. Wenn dies der Fall
ist, prüfen Sie den Sensor.
441501 Move to Tray Elevator supply/exchange position error (Block2)
Elevator pre-check error
-----
441502 Move to Tray Elevator supply/exchange position error (Block2)
Elevator movement position error
-----
441504 Move to Tray Elevator supply/exchange position error (Block2)
Elevator operating error
441602 Tray Feeder Zeroing Error (Block2)
Tray feeder zeroing Servo ON error
-----
441603 Tray Feeder Zeroing Error (Block2)
Traverse pallet search error
-----
441604 Tray Feeder Zeroing Error (Block2)
Elevator zeroing error
-----
441605 Tray Feeder Zeroing Error (Block2)
Elevator zeroing error
-----
441606 Tray Feeder Zeroing Error (Block2)
The palette was detected though there was no draw out history.
Öffnen Sie die Abdeckung und entnehmen Sie die Palette.
441607 Tray Feeder Zeroing Error (Block2)
Elevator return steps movement error
-----
DEUKYX
3-70193-4110
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
441608 Tray Feeder Zeroing Error (Block2)
Traverse pallet store error
-----
441609 Tray Feeder Zeroing Error (Block2)
Elevator zeroing pre-check error
-----
44.160a Tray Feeder Zeroing Error (Block2)
Pallet chuck close error
-----
44160b Tray Feeder Zeroing Error (Block2)
Rack shutter CLOSE error
-----
44160c Tray Feeder Zeroing Error (Block2)
Elevator zeroing error
-----
44160d Tray Feeder Zeroing Error (Block2)
EV1 step logs and step movement error
-----
44160e Tray Feeder Zeroing Error (Block2)
Ev2 step logs and step movement error
-----
44160f Tray Feeder Zeroing Error (Block2)
Traverse zeroing error
-----
441610 Tray Feeder Zeroing Error (Block2)
Traverse zeroing pre-check error
-----
441611 Tray Feeder Zeroing Error (Block2)
Pallet chuck CLOSE error
-----
441613 Tray Feeder Zeroing Error (Block2)
Pallet chuck OPEN error
-----
441614 Tray Feeder Zeroing Error (Block2)
Traverse recede operation error
-----
441615 Tray Feeder Zeroing Error (Block2)
The palette was not detected though there was a draw out history.
-----
441616 Tray Feeder Zeroing Error (Block2)
Rack shutter OPEN error(Upper Magazine)
-----
441617 Tray Feeder Zeroing Error (Block2)
Rack shutter OPEN error(Lower Magazine)
-----
DEUKYX
3-71193-4110
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
441618 Tray Feeder Zeroing Error (Block2)
The other pallet was detected from pallet store position during pulling.
-----
441619 Tray Feeder Zeroing Error (Block2)
Traverse zeroing error
-----
44161a Tray Feeder Zeroing Error (Block2)
Pallet chuck CLOSE error
-----
44161b Tray Feeder Zeroing Error (Block2)
Rack shutter CLOSE error
-----
44161c Tray Feeder Zeroing Error (Block2)
Magazine(Down) Error in shifting Pallet existence detection position.
-----
44161d Tray Feeder Zeroing Error (Block2)
Magazine(Up) Error in shifting Pallet existence detection position.
-----
44161e Tray Feeder Zeroing Error (Block2)
Missing detect sensor is detected although a pallet is stroed.
Prüfen Sie, ob sich die Palette im UP/DOWN-Magazin bendet. Alle Paletten sind
abgelegt, aber eine fehlt. Justieren Sie die Sensorposition [B15406].
441801 Pre-check Error of Tray Feeder(Block2)
Tray power supply not turning on(power supply cut off from main machine)
-----
441802 Pre-check Error of Tray Feeder(Block2)
Main safety cover is open.
Schließen Sie die Haupt-Sicherheitsverkleidung, verriegeln Sie sie und drücken
Sie die [BEREIT]-Taste.
441803 Pre-check Error of Tray Feeder(Block2)
Tray maintenance cover OPEN
-----
441804 Pre-check Error of Tray Feeder(Block2)
Traverse axis main circuit was cut off
-----
441805 Pre-check Error of Tray Feeder(Block2)
Safety circuit cut off
-----
441806 Pre-check Error of Tray Feeder(Block2)
Elevator axis main circuit cut off
-----
441807 Pre-check Error of Tray Feeder(Block2)
Tray Safety Cover(Upper) is open.
Schließen Sie die obere Tray-Sicherheitsverkleidung, verriegeln Sie sie und drü-
cken Sie die [BEREIT]-Taste.