DEUKYX-193-4110_G5S2_VOL4.pdf - 第340页
DEUKYX 3-162 193-41 10 3.13 Autom. T eaching Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 604610 T eaching Height of Glass Jig Flange of Nozzle is not detected within the predetermine range.(E/NR) V e…
DEUKYX
3-161193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
604601 Teaching Height of Glass Jig
Error is detected before starting Detection on Side view camera.(There is a possi-
bility that Side view camera is broken, or Odd Noz is placed.)
-----
604602 Teaching Height of Glass Jig
Time-out of [OFF] signal of Side view camera
-----
604603 Teaching Height of Glass Jig
Error in DD-axis
-----
604604 Teaching Height of Glass Jig
Error in NS-axis
-----
604605 Teaching Height of Glass Jig
Error in DD/NS-axis
-----
604606 Teaching Height of Glass Jig
Time-out of DD/NS-axis
-----
604607 Teaching Height of Glass Jig
Error in calculating drive wave of HL-axis
-----
604608 Teaching Height of Glass Jig
Error in calculating drive wave of NL-axis
-----
604609 Teaching Height of Glass Jig
Time-out of starting HL/NL-axis movement
-----
60460a Teaching Height of Glass Jig
Time-out of starting HL-axis movement
-----
60460b Teaching Height of Glass Jig
Time-out of starting NL-axis movement
-----
60460c Teaching Height of Glass Jig
Time-out of nishing HL/NL-axis movement
-----
60460d Teaching Height of Glass Jig
Failed in measuring real time of side view camera.
-----
60460e Teaching Height of Glass Jig
Error in measuring Side view camera
-----
60460f Teaching Height of Glass Jig
Flange of Nozzle is not detected within the predetermine range.(Not E/NR)
Vermessen Sie, nachdem die Kopfrotation auf der Winkelachse ermittelt wurde,
die Höhe neu.
DEUKYX
3-162193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
604610 Teaching Height of Glass Jig
Flange of Nozzle is not detected within the predetermine range.(E/NR)
Vermessen Sie, nachdem die Kopfrotation auf der Winkelachse ermittelt wurde,
die Höhe neu.
604611 Teaching Height of Glass Jig
The height of Flange of Nozzle is not changed.(Nozzle pressed is not detected.)
-----
604612 Teaching Height of Glass Jig
Program Error
-----
604613 Teaching Height of Glass Jig
Offset is 1mm less than the set value.
-----
604614 Teaching Height of Glass Jig
Offset is 1mm more than the set value.
-----
604615 Teaching Height of Glass Jig
The value of Flowmeter is higher than 5.0V.
-----
604616 Teaching Height of Glass Jig
The value of Flowmeter is lower than 4.7V.
-----
604617 Teaching Height of Glass Jig
There is no measured data of Noz 1. It is necessary to measure Noz1 rst.
-----
604618 Teaching Height of Glass Jig
Cannot measure it for XY-coord is not dened.
-----
604619 Teaching Height of Glass Jig
Error in Flowing Quantity
-----
604701 Teaching Height of Traverse Chute
Error is detected before starting Detection on Side view camera.(There is a possi-
bility that Side view camera is broken, or Odd Noz is placed.)
-----
604702 Teaching Height of Traverse Chute
Time-out of [OFF] signal of Side view camera
-----
604703 Teaching Height of Traverse Chute
Error in DD-axis
-----
604704 Teaching Height of Traverse Chute
Error in NS-axis
-----
604705 Teaching Height of Traverse Chute
Error in DD/NS-axis
-----
DEUKYX
3-163193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
604706 Teaching Height of Traverse Chute
Time-out of DD/NS-axis
-----
604707 Teaching Height of Traverse Chute
Error in calculating drive wave of HL-axis
-----
604708 Teaching Height of Traverse Chute
Error in calculating drive wave of NL-axis
-----
604709 Teaching Height of Traverse Chute
Time-out of starting HL/NL-axis movement
-----
60470a Teaching Height of Traverse Chute
Time-out of starting HL-axis movement
------
60470b Teaching Height of Traverse Chute
Time-out of starting NL-axis movement
------
60470c Teaching Height of Traverse Chute
Time-out of nishing HL/NL-axis movement
------
60470d Teaching Height of Traverse Chute
Failed in measuring real time of side view camera.
------
60470e Teaching Height of Traverse Chute
Error in measuring Side view camera
------
60470f Teaching Height of Traverse Chute
Flange of Nozzle is not detected within the predetermine range.(Not E/NR)
Vermessen Sie, nachdem die Kopfrotation auf der Winkelachse ermittelt wurde,
die Höhe neu.
604710 Teaching Height of Traverse Chute
Flange of Nozzle is not detected within the predetermine range.(E/NR)
Vermessen Sie, nachdem die Kopfrotation auf der Winkelachse ermittelt wurde,
die Höhe neu.
604711 Teaching Height of Traverse Chute
The height of Flange of Nozzle is not changed.(Nozzle pressed is not detected.)
------
604712 Teaching Height of Traverse Chute
Program Error
------
604713 Teaching Height of Traverse Chute
Offset is 1mm less than the set value.
------
604714 Teaching Height of Traverse Chute
Offset is 1mm more than the set value.
------