DEUKYX-193-4110_G5S2_VOL4.pdf - 第320页

DEUKYX 3-142 193-41 10 3.13 Autom. T eaching Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 600707 Fly recog. Offset teach Error of moving for XY Beam. ----- 600708 Fly recog. Offset teach T ime-out in …

100%1 / 386
DEUKYX
3-141193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
600603 Nozzle position offset teach
Error of coordinates calculation.
-----
600604 Nozzle position offset teach
Error when DD-axis began to rotate.
-----
600605 Nozzle position offset teach
Error while DD-axis is rotating
-----
600606 Nozzle position offset teach
Error when HL-axis and NL-axis began zeroing
-----
600607 Nozzle position offset teach
Error while HL-axis and NL-axis are on zeroing
-----
600608 Nozzle position offset teach
Error of Data set for XY Beam.
-----
600609 Nozzle position offset teach
Error of moving for XY Beam.
-----
60060a Nozzle position offset teach
Time-out in XY Beam movement
-----
60060b Nozzle position offset teach
Time-out in communication with Recognition
-----
600701 Fly recog. Offset teach
Could not recognize Standard Mark Stop
1. Reinigen Sie den Markenbereich.
2. Prüfen Sie die Beleuchtung.
600702 Fly recog. Offset teach
Could not recognize Standard Mark Fly
1. Reinigen Sie den Markenbereich.
2. Prüfen Sie die Beleuchtung.
600703 Fly recog. Offset teach
Error of Recognition Command Responses in a case of Head Stop Recognition
-----
600704 Fly recog. Offset teach
Error of Recognition Command Responses in a case of Fly Recognition
-----
600705 Fly recog. Offset teach
Error of Coordinates calculation
-----
600706 Fly recog. Offset teach
Error of Data set for XY Beam.
-----
DEUKYX
3-142193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
600707 Fly recog. Offset teach
Error of moving for XY Beam.
-----
600708 Fly recog. Offset teach
Time-out in XY Beam movement
-----
600709 Fly recog. Offset teach
Time-out of communication with recognition
-----
600801 Teaching Pick-up Position
Please push the Feeder Ready SW
-----
600802 Teaching Pick-up Position
Error of Feeder Mark Recognition
(1) Reinigen Sie den Markenbereich.
(2) Prüfen Sie die PEC-Beleuchtung.
600803 Teaching Pick-up Position
Feeder connection is set in test mode.
Setzen Sie das Testmuster auf „OK“.
600804 Teaching Pick-up Position
The data of the feeder was not able to be read.
(1) Entnehmen Sie den Feeder und prüfen Sie die Anschlüsse.
(2) Tauschen Sie den Feeder aus.
600805 Teaching Pick-up Position
Time-over of Feeder Mark Recognition Process
-----
600806 Teaching Pick-up Position
Time-out in XY Beam movement
-----
600807 Teaching Pick-up Position
Error of moving for XY Beam.
-----
600808 Teaching Pick-up Position
Error of processing Recognition Stop
-----
600809 Teaching Pick-up Position
Error of processing Light on
-----
60080a Teaching Pick-up Position
Error of processing image capture
-----
600901 Teaching Leaning Nozzle offset
Could not recognize Glass Jig
Prüfen Sie, ob sich der Glasrahmen an der richtigen Position bendet (Es besteht
die Möglichkeit, dass sich der Aufnehmer nicht im Kopf bendet oder kein Vakuum
anliegt.)
600902 Teaching Leaning Nozzle offset
Error of Recognition Command Response
-----
DEUKYX
3-143193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
600903 Teaching Leaning Nozzle offset
Error of coordinates calculation.
-----
600904 Teaching Leaning Nozzle offset
Error of Data set for XY Beam.
-----
600905 Teaching Leaning Nozzle offset
Error of moving for XY Beam.
-----
600906 Teaching Leaning Nozzle offset
Time-out in XY Beam movement
-----
600907 Teaching Leaning Nozzle offset
Time-out of communication with recognition.
-----
600908 Teaching Leaning Nozzle offset
Error of Leaning Nozzle offset teaching
-----
600909 Teaching Leaning Nozzle offset
Error of Noz Select Axis Pos. Offset Teaching
-----
60090A Teaching Leaning Nozzle offset
Noz Select Axis Pos. Offset is out of permission values.
Möglicherweise ist der Theta-Achsenoffset der Kopfrotation nicht korrekt
eingestellt. Möglicherweise Sind Leuchtquelle und Empfänger der
Linearmesssystems verschmutz. Der Aufnehmer kann beschädigt sein.
Möglicherweise wurde weist der Kopf einen Fehler auf.
60090B Teaching Leaning Nozzle offset
Could not measure correctly on Noz Select Axis Pos. Offset Teaching.
Möglicherweise ist der Theta-Achsenoffset der Kopfrotation nicht korrekt
eingestellt. Möglicherweise Sind Leuchtquelle und Empfänger der
Linearmesssystems verschmutz. Der Aufnehmer kann beschädigt sein.
Möglicherweise wurde weist der Kopf einen Fehler auf.
601001 Master nozzle level offset teach
Error is detected before Side View Camera measurement began
-----
601002 Master nozzle level offset teach
Error of NS-axis movement
-----
601003 Master nozzle level offset teach
Error of DD-axis movement
-----
601004 Master nozzle level offset teach
Time-out of NS-axis movement
-----