456.pdf - 第20页

20 Probe Placement Jig Elcometer 456 & 355 All Elcometer 456 probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specic application, including; The Elcometer Probe…

100%1 / 32
elcometer.com
19
Dry Film Thickness - Digital
Ferrous (F) Probes
#
Description Probe Length
c
Part Number
Minimum
Headroom
Minimum Sample
Diameter
b
1
Straight Probe 45mm (1.77”) T456CF6S 150mm (5.90”)
51 x 51mm
2
(2 x 2 inch
2
)
2
Straight Probe
armoured cable 45mm (1.77”) T456CF6ARM 190mm (7.48”)
51 x 51mm
2
(2 x 2 inch
2
)
Non-Ferrous (N) Probes
#
Description Probe Length
c
Part Number
Minimum
Headroom
Minimum Sample
Diameter
b
1
Straight Probe 45mm (1.77”) T456CN6S 160mm (6.30”) 58mm (2.29”)
2
Straight Probe
armoured cable 45mm (1.77”) T456CN6ARM 200mm (7.87") 58mm (2.29”)
Accuracy
a
: ±1-3% or ±100μm ±1-3% or ±4.0mils
Range
:
F: 0-25mm
N: 0-30mm
F: 0-980mils
N: 0-1,200mils
Resolution:
10μm: 0-2mm
100μm: 2-30mm
1mil: 0-100mils
10mils: 100-1,200mils
Certicate: ●
Scale 6 Probe Range F: 0-25mm / 0-980mils N: 0-30mm / 0-1,200mils
1 2
Probe Range for Separate Coating Thickness GaugeElcometer 456
Ferrous (F) Probes
#
Description Probe Length
c
Part Number
Minimum
Headroom
Minimum Sample
Diameter
b
2
Straight Probe
armoured cable 45mm (1.77”) T456CF7ARM 200mm (7.87”)
55 x 55mm
2
(2.17 x 2.17 inch
2
)
Scale 7 Probe Range 0-31mm / 0-1,220mils
Accuracy
a
: ±1-3% or ±100μm ±1-3% or ±4.0mils
Range
d
: 0-31mm 0-1220mils
Resolution:
10μm: 0-2mm
100μm: 2-31mm
1.0mil: 0-100mils
10mils:100-1220mils
Certicate: ●
See '#' on the probes table below for comparison.
20
Probe Placement JigElcometer 456 & 355
All Elcometer 456 probes are fully interchangeable and are
available in a number of designs and scale ranges to meet your
specic application, including;
The Elcometer Probe Placement Jig is the ideal accessory for
measuring coatings on small or complex components when the
highest levels of repeatability and accuracy are required.
Housings to suit other
probes are available as
optional accessories
Compatible with
Elcometer 456 probes
and Elcometer 355
probes
Increases the gauge's
repeatability and
reproducibility
Ideal for small and large
components alike
Dry Film Thickness - Digital
elcometer.com
21
Probe Placement Jig Elcometer 456 & 355
Dry Film Thickness - Digital
The Elcometer Probe Placement Jig is the ideal accessory for measuring coatings
on small or complex components when the highest levels of repeatability and
accuracy are required.
The Probe Placement Jig makes the gauge score highly in repeatability and
reproducibility studies by placing the probe accurately, at the same angle and in the
same place on the substrate each time.
Ideal for small and large components alike, the Probe Placement Jig is supplied
with a probe housing and a component holder to suit straight Scale 1 or Scale 2
Elcometer 456 probes and standard F1, F2, F4, F5 and N1 Elcometer 355 probes.
Housings to suit other probes are available as optional accessories.
Part Number Description
T95012880 Probe Placement Jig
Each Probe Placement jig is supplied with a probe housing and a component holder to suit straight Scale 1 or Scale 2 Elcometer 456
probes and standard F1, F2, F4, F5 and N1 Elcometer 355 probes.
T95013028 Component Hand Vice
T95012888 Cable Release Assembly - ideal for remote measurements
T95015961 Dual FNF Probe Housing Adaptor
T95016896 Mini Probe Housing Adaptor
Technical Specication
For a wide range of probes to meet your specic application,
see page 8