456.pdf - 第23页
elcometer.com 23 For a full range of calibration standards and foil sets see page 28 Using the Data Output Controller Dry Film Thickness - Digital Data Output Controller Enables data to be output from the Elcometer 456 v…
22
Dry Film Thickness - Digital
AccessoriesElcometer 456
V-Probe Adaptor
Ideal for precision placement for the most accurate results on medium and
large diameter curved surfaces such as pipes and cylinders. Suitable for any
Elcometer 456 Scale 1 or Scale 2 straight probes.
Jumbo Hand Grip
Ideal for precision placement for the most accurate results on at and curved
surfaces. Place the probe inside the Jumbo Hand Grip and take measurements
- ideal when wearing gloves. Suitable for any Elcometer 456 Scale 1 or
Scale 2 straight probes.
F and N Probes Dual FNF Probes
T9997766- T99913225 Jumbo Hand Grip
Dual FNF Probes
T99913133 V-Probe Adaptor
Scan Probe Replacement End Caps
Highly durable - when tested on smooth surfaces, probe end caps have been
scanned in excess of 50km (30 miles) - each end cap snaps on to the end of the
Scan probe signicantly enhancing the lifetime of the probe.
Roller Scan Probe Cap
Clip on adaptor designed for large coated structures, abrasive coatings and
pre-construction primers. The Roller Scan Cap can scan in excess of 50km
(30 miles) on rough surfaces without damaging the substrate or probe.
F & Dual FNF Probes
Scale 1 Scale 2
Accuracy: ±6% ±5%
Measuring Range: 100-1000μm (3.9-39mils) 0.5-4.5mm (20-180mils)
Part Number
T456C29050
Description
Elcometer 456 Roller Scan Probe Cap
1
F & Dual FNF Probes
Scale 1 Scale 2
Accuracy: ±3% or ±2.5μm (±1mil) ±1-3% or ±0.02mm (±1mil)
Measuring Range: 100-1000μm (3.9-39mils) 0.1-4.5mm (4-180mils)
Part Number
T456C23956
Description
Replacement Scan Probe End Caps (3 per pack)
elcometer.com
23
For a full range of calibration standards and foil sets see page 28
Using the Data Output Controller
Dry Film Thickness - Digital
Data Output Controller
Enables data to be output from the Elcometer 456 via RS232 ports for the purposes
of controlling automated production lines.
The Elcometer Software Support Team or users can produce their own customised
software to utilise the data output from the Elcometer 456 gauge in order to remotely
trigger pass/fail criteria for their processes.
Part Number Description
T99925387 Elcometer Data Output Controller
Operating Temperature 0 to 50°C (32°F to 122°F)
Data Input USB
Data Output One RS232 serial output via 9 way D-Type connector
Power Supply
Requires 5V 1A(min) DC supply via mini USB. External plug-in mains adaptor with
interchangeable UK/EU/US/AUS pins supplied.
Packing List
Elcometer Data Output Controller, USB to RS232 converter lead, power supply
(with 4 sets of interchangeable pins)
The Elcometer 456 coating thickness gauge probe is attached to a robot
arm, to automatically measure dry lm thickness on the production line.
The Elcometer 456 connects to the data output controller to transfer live
dry lm thickness readings via RS232 ports to the automated production
line.
Customised software for the data output controller can be produced,
using high/low limits to trigger a pass or fail on the automated production
line, helping to improve quality.
Accessories Elcometer 456
24
Dry Film Thickness - Digital
Integral Coating Thickness GaugeElcometer 456
Easy to read, user
denable display with
automatic screen
brightness
Reading rate of
70+ per minute
Scratch and solvent
resistant screen
Ergonomic design,
ideal for continuous
use
Bigfoot
™
integral probe
Stores up to
150,000 readings in
alphanumeric batches
Measure coatings up
to 13mm (500mils)
on metal substrates
The Elcometer 456 Coating Thickness Gauge is available with an
integral probe; ideal for single handed operation for consistent,
repeatable and accurate results.
Elcometer 3045
·
F
A
S
T
·
R
E
P
E
A
T
A
B
L
E
·
A
C
C
U
R
A
T
E
·
D
U
R
A
B
L
E
Measure
DFT
Ferrous & Non-Ferrous Substrates
wireless technology
compatible with
ElcoMaster
®
®
video available
tv
elcometer.tv