00195813-05_IM_SSW_605.03_SP1_DE EN.pdf - 第30页

Installation Manual, Station Software Version 605.03 SP1 07/2011 Edition Fig. 5-11: PenMount Control Panel – "Mapping" dia log box → Acknowl edge the "Mapping" dialog box by clicking on OK . → Touch t…

100%1 / 96
Installation Manual, Station Software Version 605.03 SP1 07/2011 Edition
5.3.3.2 Calibrating the touch screen for the D-series
→ Select Start Æ Program Files Æ PenMount Utilities Æ PenMount Control Panel to start the touch
screen calibration applet.
Fig. 5-9: PenMount Control Panel
→ Open the Multiple Monitors tab.
Fig. 5-10: PenMount Control Panel – Multiple Monitors tab
→ Check the Multiple Monitor Support box.
→ Click the Map Touch Screens button.
The "Mapping" dialog box opens.
29 of 48
Installation Manual, Station Software Version 605.03 SP1 07/2011 Edition
Fig. 5-11: PenMount Control Panel – "Mapping" dialog box
→ Acknowledge the "Mapping" dialog box by clicking on OK.
→ Touch the monitor showing Please touch this monitor with your finger.
Fig. 5-12: Mapping the touch screens
The touch screens are now mapped and the PenMount Control Panel is displayed again.
→ Open the Calibrate tab.
Fig. 5-13: PenMount Control Panel – Calibrate tab
→ Click the Standard Calibration button. The Calibrate dialog box opens.
30 of 48
Installation Manual, Station Software Version 605.03 SP1 07/2011 Edition
Fig. 5-14: "Calibrate" dialog box
→ Acknowledge the dialog box by clicking on OK.
→ Touch the monitor you wish to calibrate with the pen supplied. You are now prompted to Touch the
red square.
Fig. 5-15: Calibration marks
NOTICE
→ Touch the calibration icon within 20 seconds, otherwise calibration is automatically
canceled.
→ Make sure that you are standing directly in front of the monitor.
→ Carry out calibration in the position (standing or seated) you normally adopt when
working at this screen.
→ Touch the calibration icon firmly and accurately with your fingertip.
→ Make sure that you do not inadvertently touch the screen with any other finger.
→ Touch the red calibration marks with the pen in the numbered sequence shown.
→ Carry out the steps described above for the second screen as well.
→ Click OK in the PenMount Control Panel to close the program.
31 of 48