111.pdf - 第12页

Machine Automati on Controller NX1P 12 EtherCAT Coupler Units NX-series Units on previous pages and NX-series Safety Units ca n be used by connecting to the EtherCAT Coupler Unit that is connected to the built-in EtherCA…

Machine Automation Controller NX1P

IO-Link Master Unit

System Units

* Use the NX-PF0730 at 4 A or less on the CPU Rack where the NX1P2 CPU Unit is mounted.

EtherNet/IP Coupler Unit

*1. One End Cover NX-END01 is provided with the EtherCAT Coupler Unit.

Product Name

Specification

Model

Number of

IO-Link ports

I/O refreshing method I/O connection terminals

IO-Link Master Unit

Free-Run refreshing

Screwless clamping terminal block NX-ILM400

Product Name Specification

Model

Additional NX Unit

Power Supply Unit

Power supply voltage: 24 VDC (20.4 to 28.8 VDC)

NX Bus power supply capacity: 10 W max.

NX-PD1000

Additional I/O Power

Supply Unit

Power supply voltage: 5 to 24 VDC (4.5 to 28.8 VDC)

I/O power feed maximum current: 4 A

NX-PF0630

Power supply voltage: 5 to 24 VDC (4.5 to 28.8 VDC)

I/O power feed maximum current: 10 A *

NX-PF0730

I/O Power Supply

Connection Unit

Number of I/O power terminals: IOG: 16 terminals

Current capacity of I/O power terminal: 4 A/terminal max.

NX-PC0010

Number of I/O power terminals: IOV: 16 terminals

Current capacity of I/O power terminal: 4 A/terminal max.

NX-PC0020

Number of I/O power terminals: IOV: 8 terminals, IOG: 8 terminals

Current capacity of I/O power terminal: 4 A/terminal max

NX-PC0030

Shield Connection

Unit

Number of shield terminals: 14 terminals

(The following two terminals are functional ground terminals.)

NX-TBX01

Product name Current consumption Maximum I/O power supply current Model

EtherNet/IP Coupler

Unit *

1.60 W or lower 10 A

NX-EIC202

Machine Automation Controller NX1P

EtherCAT Coupler Units

NX-series Units on previous pages and NX-series Safety Units can be used by connecting to the EtherCAT Coupler Unit that is connected to the

built-in EtherCAT port on the NX1P2 CPU Unit.

*1. One End Cover NX-END01 is provided with the EtherCAT Coupler Unit.

*2. This depends on the specifications of the EtherCAT master. For example, the values are as follows when the EtherCAT Coupler Unit is

connected to the built-in EtherCAT port on an NJ5-series CPU Unit: 500

μs, 1,000 μs, 2,000 μs, and 4,000 μs. Refer to the NJ/NX-series CPU

Unit Built-in EtherCAT Port User’ Manual (Cat. No. W505) for the specifications of the built-in EtherCAT ports on NJ/NX-series CPU Units. This

also depends on the unit configuration.

Safety CPU Units

Note: Connect the Safety CPU Unit to the NX1P2 CPU Unit via the EtherCAT Coupler Unit.

Safety Input Units

Note: Connect the Safety Input Unit to the NX1P2 CPU Unit via the EtherCAT Coupler Unit.

Safety Output Units

Note: Connect the Safety Output Unit to the NX1P2 CPU Unit via the EtherCAT Coupler Unit.

Product Name Communications cycle in DC Mode Current consumption Maximum I/O power supply current

Model

EtherCAT Coupler

Unit *1

250 to 4000 μs *2

1.45 W max.

4 A NX-ECC201

250 to 4000 μs *2

10 A

NX-ECC202

125 to 10000 μs *2 1.25 W max. NX-ECC203

Appearance

Specification

Model

Maximum number of

safety I/O points

Program capacity

Number of safety master

connections

I/O refreshing method

Unit

version

256 points 512 KB 32 Free-Run refreshing Ver.1.1 NX-SL3300

1024 points 2048 KB 128 Free-Run refreshing Ver.1.1 NX-SL3500

Appearance

Specification

Model

Number of safety

input points

Number of test

output points

Internal I/O

common

Rated

input

voltage

OMRON special

safety input

devices

Number of safety

slave

connections

I/O

refreshing

method

Unit

version

4 points 2 points

Sinking

inputs

(PNP)

24 VDC

Can be

connected.

Free-Run

refreshing

Ver.1.1 NX-SIH400

8 points 2 points

Sinking

inputs

(PNP)

24 VDC

Cannot be

connected.

Free-Run

refreshing

Ver.1.0 NX-SID800

Appearance

Specification

Model

Number of

Model safety

output points

Internal I/O

common

Maximum load current Rated voltage

Number of

safety slave

connections

I/O

refreshing

method

Unit

version

2 points

Sourcing

outputs

(PNP)

2.0 A/point, 4.0 A/Unit at 40°C,

and 2.5A/Unit at 55°C

The maximum load current

depends on the installation

orientation and ambient

temperature.

24 VDC

Free-Run

refreshing

Ver.1.0 NX-SOH200

4 points

Sourcing

outputs

(PNP)

0.5 A/point

and

2.0 A/Unit

24 VDC

Free-Run

refreshing

Ver.1.0 NX-SOD400

Machine Automation Controller NX1P

NX Unit Power Supply System

Add one or more NX-PF Additional I/O Power Supply Units when I/O power is supplied from the NX bus to NX Units connected to the CPU Unit.

Check the table below.

Note: Refer to the NX-series NX1P2 CPU Unit Hardware User’s Manual (Cat. No. W578) for the NX Unit power supply system.

NX Units Model

NX-PF Additional

I/O Power Supply

Unit required

Digital Input Units

NX-ID3317 Yes

NX-ID3343 Yes

NX-ID3344 Yes

NX-ID3417 Yes

NX-ID3443 Yes

NX-ID3444 Yes

NX-ID4342 Yes

NX-ID4442 Yes

NX-ID5342 Yes

NX-ID5442 Yes

NX-ID6342 Yes

NX-ID6442 Yes

NX-ID5142-1 No

NX-ID5142-5 No

NX-ID6142-5 No

NX-ID6142-6 No

NX-IA3117 No

Digital output Units

NX-OD2154 Yes

NX-OD2258 Yes

NX-OD3121 Yes

NX-OD3153 Yes

NX-OD3256 Yes

NX-OD3257 Yes

NX-OD3268 No

NX-OD4121 Yes

NX-OD4256 Yes

NX-OD5121 Yes

NX-OD5256 Yes

NX-OD6121 Yes

NX-OD6256 Yes

NX-OD5121-1 No

NX-OD5256-1 No

NX-OD5121-5 No

NX-OD5256-5 No

NX-OD6121-5 No

NX-OD6256-5 No

NX-OD6121-6 No

NX-OC2633 No

NX-OC2733 No

NX-OC4633 No

Digital Mixed I/O

Units

NX-MD6121-5 No

NX-MD6256-5 No

NX-MD6121-6 No

High-speed Analog

Input Units

NX-HAD401 Yes

NX-HAD402 Yes

Analog Input Units

NX-AD2603 Yes

NX-AD2604 No

NX-AD2608 No

NX-AD3603 Yes

NX-AD3604 No

NX-AD3608 No

NX-AD4603 Yes

NX-AD4604 No

NX-AD4608 No

NX-AD2203 Yes

NX-AD2204 No

NX-AD2208 No

NX-AD3203 Yes

NX-AD3204 No

NX Units Model

NX-PF Additional

I/O Power Supply

Unit required

Analog Input Units

NX-AD3208 No

NX-AD4203 Yes

NX-AD4204 No

NX-AD4208 No

Analog Output Units

NX-DA2603 Yes

NX-DA2605 Yes

NX-DA3603 Yes

NX-DA3605 Yes

NX-DA2203 Yes

NX-DA2205 Yes

NX-DA3203 Yes

NX-DA3205 Yes

Temperature

Control Units

NX-TC2405 Yes

NX-TC2406 Yes

NX-TC2407 Yes

NX-TC2408 Yes

NX-TC3405 Yes

NX-TC3406 Yes

NX-TC3407 Yes

NX-TC3408 Yes

Temperature Input

Units

NX-TS2101 No

NX-TS3101 No

NX-TS2102 No

NX-TS3102 No

NX-TS2104 No

NX-TS3104 No

NX-TS2201 No

NX-TS3201 No

NX-TS2202 No

NX-TS3202 No

NX-TS2204 No

NX-TS3204 No

Heater Burnout

Detection Units

NX-HB3101 Yes

NX-HB3201 Yes

Load Cell Input Unit NX-RS1201 No

Position interface:

Incremental

Encoder Input Units

NX-EC0112 Yes

NX-EC0122 Yes

NX-EC0132 Yes

NX-EC0142 Yes

NX-EC0212 Yes

NX-EC0222 Yes

Position interface:

SSI Input Units

NX-ECS112 Yes

NX-ECS212 Yes

Position interface:

Pulse Output Units

NX-PG0112 Yes

NX-PG0122 Yes

NX-PG0232-5 No

NX-PG0242-5 No

NX-PG0332-5 No

NX-PG0342-5 No

Communications

Interface Units

NX-CIF101 No

NX-CIF105 No

NX-CIF210 No

RFID Units

NX-V680C1 Yes

NX-V680C2 Yes

IO-Link Master Unit NX-ILM400 Yes