111.pdf - 第14页

Machine Automati on Controller NX1P 14 Automation Software Sysmac Studio The Sysmac Studio is the software that provid es an integrated e nvironment for setting, programming, debugging and mainte nance of machine automat…

Machine Automation Controller NX1P

NX Unit Power Supply System

Add one or more NX-PF Additional I/O Power Supply Units when I/O power is supplied from the NX bus to NX Units connected to the CPU Unit.

Check the table below.

Note: Refer to the NX-series NX1P2 CPU Unit Hardware User’s Manual (Cat. No. W578) for the NX Unit power supply system.

NX Units Model

NX-PF Additional

I/O Power Supply

Unit required

Digital Input Units

NX-ID3317 Yes

NX-ID3343 Yes

NX-ID3344 Yes

NX-ID3417 Yes

NX-ID3443 Yes

NX-ID3444 Yes

NX-ID4342 Yes

NX-ID4442 Yes

NX-ID5342 Yes

NX-ID5442 Yes

NX-ID6342 Yes

NX-ID6442 Yes

NX-ID5142-1 No

NX-ID5142-5 No

NX-ID6142-5 No

NX-ID6142-6 No

NX-IA3117 No

Digital output Units

NX-OD2154 Yes

NX-OD2258 Yes

NX-OD3121 Yes

NX-OD3153 Yes

NX-OD3256 Yes

NX-OD3257 Yes

NX-OD3268 No

NX-OD4121 Yes

NX-OD4256 Yes

NX-OD5121 Yes

NX-OD5256 Yes

NX-OD6121 Yes

NX-OD6256 Yes

NX-OD5121-1 No

NX-OD5256-1 No

NX-OD5121-5 No

NX-OD5256-5 No

NX-OD6121-5 No

NX-OD6256-5 No

NX-OD6121-6 No

NX-OC2633 No

NX-OC2733 No

NX-OC4633 No

Digital Mixed I/O

Units

NX-MD6121-5 No

NX-MD6256-5 No

NX-MD6121-6 No

High-speed Analog

Input Units

NX-HAD401 Yes

NX-HAD402 Yes

Analog Input Units

NX-AD2603 Yes

NX-AD2604 No

NX-AD2608 No

NX-AD3603 Yes

NX-AD3604 No

NX-AD3608 No

NX-AD4603 Yes

NX-AD4604 No

NX-AD4608 No

NX-AD2203 Yes

NX-AD2204 No

NX-AD2208 No

NX-AD3203 Yes

NX-AD3204 No

NX Units Model

NX-PF Additional

I/O Power Supply

Unit required

Analog Input Units

NX-AD3208 No

NX-AD4203 Yes

NX-AD4204 No

NX-AD4208 No

Analog Output Units

NX-DA2603 Yes

NX-DA2605 Yes

NX-DA3603 Yes

NX-DA3605 Yes

NX-DA2203 Yes

NX-DA2205 Yes

NX-DA3203 Yes

NX-DA3205 Yes

Temperature

Control Units

NX-TC2405 Yes

NX-TC2406 Yes

NX-TC2407 Yes

NX-TC2408 Yes

NX-TC3405 Yes

NX-TC3406 Yes

NX-TC3407 Yes

NX-TC3408 Yes

Temperature Input

Units

NX-TS2101 No

NX-TS3101 No

NX-TS2102 No

NX-TS3102 No

NX-TS2104 No

NX-TS3104 No

NX-TS2201 No

NX-TS3201 No

NX-TS2202 No

NX-TS3202 No

NX-TS2204 No

NX-TS3204 No

Heater Burnout

Detection Units

NX-HB3101 Yes

NX-HB3201 Yes

Load Cell Input Unit NX-RS1201 No

Position interface:

Incremental

Encoder Input Units

NX-EC0112 Yes

NX-EC0122 Yes

NX-EC0132 Yes

NX-EC0142 Yes

NX-EC0212 Yes

NX-EC0222 Yes

Position interface:

SSI Input Units

NX-ECS112 Yes

NX-ECS212 Yes

Position interface:

Pulse Output Units

NX-PG0112 Yes

NX-PG0122 Yes

NX-PG0232-5 No

NX-PG0242-5 No

NX-PG0332-5 No

NX-PG0342-5 No

Communications

Interface Units

NX-CIF101 No

NX-CIF105 No

NX-CIF210 No

RFID Units

NX-V680C1 Yes

NX-V680C2 Yes

IO-Link Master Unit NX-ILM400 Yes

Machine Automation Controller NX1P

Automation Software Sysmac Studio

The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine

automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCAT Slave, and the HMI.

For details, refer to your local OMRON website and Sysmac Studio Catalog (Cat. No. P138).

Collection of software functional components Sysmac Library

Please download it from following URL and install to Sysmac Studio.

https://www.ia.omron.com/sysmac_library/

Typical Models

Product Features Model

Vibration Suppression Library

The Vibration Suppression Library is used to suppress residual vibration caused by the operation of

machines.

SYSMAC-XR006

Device Operation Monitor Library

The Device Operation Monitor Library is used to monitor the operation of devices such as air cylinders,

sensors, motors, and other devices.

SYSMAC-XR008

Dimension Measurement Library

The Dimension Measurement Library is used to dimension measurement with ZW-8000/7000/5000

Confocal Fiber Displacement Sensor, or E9NC-TA0 Contact-Type Smart Sensor.

SYSMAC-XR014

Machine Automation Controller NX1P

Recommended EtherCAT and EtherNet/IP Communications Cables

Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.

For EtherNet/IP, required specification for the communications cables varies depending on the baud rate.

For 100BASE-TX/10BASE-T, use an STP (shielded twisted-pair) cable of Ethernet category 5 or higher.

Cable with Connectors

*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m, 7.5 m, 10 m, 15 m, 20 m.

Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.

For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).

*2. Cable colors are available in yellow, green, and blue.

*3. For details, contact your OMRON representative.

*4. The products can be used only with the NX701/NX502.

Cables / Connectors

*1. We recommend you to use the above Cable and RJ45 Connector together.

*2. The products can be used only with the NX701/NX502.

*3. We recommend you to use the above Cable and RJ45 Assembly Connector together.

Item

Recommended

manufacturer

Cable length (m) Model

Wire Gauge and Number of Pairs:

AWG26, 4-pair Cable

Cable Sheath material: PUR

Cable with Connectors on Both Ends

(RJ45/RJ45)

Standard RJ45 plug type *1

Cable color: Yellow *2

EtherCAT/

EtherNet/IP (10BASE/100BASE/1000BASE *4)

OMRON

0.3 XS6W-6PUR8SS30CM-YF

0.5 XS6W-6PUR8SS50CM-YF

1 XS6W-6PUR8SS100CM-YF

2 XS6W-6PUR8SS200CM-YF

3 XS6W-6PUR8SS300CM-YF

5 XS6W-6PUR8SS500CM-YF

Wire Gauge and Number of Pairs:

AWG22, 2-pair cable

Cable with Connectors on Both Ends

(RJ45/RJ45)

Rugged RJ45 plug type *1

Cable color: Light blue

EtherCAT/

EtherNet/IP (10BASE/100BASE)

OMRON

0.3 XS5W-T421-AMD-K

0.5 XS5W-T421-BMD-K

1 XS5W-T421-CMD-K

2 XS5W-T421-DMD-K

5 XS5W-T421-GMD-K

10 XS5W-T421-JMD-K

Cable with Connectors on Both Ends

(M12 Straight/M12 Straight)

Shield Strengthening Connector cable *3

M12/Smartclick Connectors

Cable color: Black

EtherCAT/

EtherNet/IP (10BASE/100BASE)

OMRON

0.5 XS5W-T421-BM2-SS

1 XS5W-T421-CM2-SS

2 XS5W-T421-DM2-SS

3 XS5W-T421-EM2-SS

5 XS5W-T421-GM2-SS

10 XS5W-T421-JM2-SS

Cable with Connectors on Both Ends

(M12 Straight/RJ45)

Shield Strengthening Connector cable *3

M12/Smartclick Connectors

Rugged RJ45 plug type

Cable color: Black

EtherCAT/

EtherNet/IP (10BASE/100BASE)

OMRON

0.5 XS5W-T421-BMC-SS

1 XS5W-T421-CMC-SS

2 XS5W-T421-DMC-SS

3 XS5W-T421-EMC-SS

5 XS5W-T421-GMC-SS

10 XS5W-T421-JMC-SS

Item Recommended manufacturer Model

Products for EtherCAT or

EtherNet/IP

(1000BASE-T

/100BASE-TX)

Wire Gauge and Number of

Pairs: AWG24, 4-pair

Cable

Cables

Kuramo Electric Co.

KETH-SB *1

RJ45 Connectors Panduit Corporation

MPS588-C *1

Products for EtherCAT or

EtherNet/IP

(100BASE-TX/10BASE-T)

Wire Gauge and Number of

Pairs: AWG22, 2-pair

Cable

Cables Kuramo Electric Co. KETH-PSB-OMR *3

JMACS Japan Co., Ltd. PNET/B *3

RJ45 Assembly Connector OMRON

XS6G-T421-1 *3