111.pdf - 第39页
Machine Automa tion Controller NX1P 39 Applicable Models for Cab le Redundancy Function For more information on applicable models of Cable Redundancy f unction, refer to the Applicabl e Models of Cable Redundancy Functio…
Machine Automation Controller NX1P
38
Related Manuals
Manual name Cat. No. Model numbers Application Description
NX-series NX1P2
CPU Unit Hardware
User’s Manual
W578 NX1P2-
Learning the basic specifications of
the NX-series NX1P2 CPU Units,
including introductory information,
designing, installation, and
maintenance.
Mainly hardware information is
provided.
An introduction to the entire NX1P2 CPU Unit system is
provided along with the following information on the
NX1P2 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NX-series
NX1P2 CPU Unit
Built-in I/O and Option Board
User's Manual
W579 NX1P2-
Learning about the details of
functions only for an NX-series
NX1P2 CPU Unit and an
introduction of functions for an NJ/
NX-series CPU Unit.
Of the functions for an NX1P2 CPU Unit, the following
information is provided.
• Built-in I/O
• Serial Communication Option Boards
• Analog I/O Option Boards
An introduction of following functions for an NJ/NX-
series CPU Unit is also provided.
• Motion control functions
• EtherNet/IP communications functions
• EtherCAT communications functions
NJ/NX-series
CPU Unit Software
User’s Manual
W501
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Learning how to program and set
up an NJ/NX-series CPU Unit.
Mainly software information is
provided.
The following information is provided on a Controller
built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
NJ/NX-series
Instructions Reference
Manual
W502
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Learning detailed specifications on
the basic instructions of an NJ/NX-
series CPU Unit.
The instructions in the instruction set (IEC 61131-3
specifications) are described.
NJ/NX-series
CPU Unit Motion Control
User’s Manual
W507
NX701-@@@@
NX502-@@@@
NX102-
@@@@
NX1
P2-@@@@
NJ501-@@@@
NJ301
-@@@@
NJ101-@@@@
Learning about motion control
settings and programming
concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
NJ/NX-series
Motion Control Instructions
Reference Manual
W508
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Learning about the specifications
of the motion control instructions.
The motion control instructions are described.
NJ/NX-series
CPU Unit Built-in EtherCAT
®
Port
User’s Manual
W505
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Using the built-in EtherCAT port on
an NJ/NX-series CPU Unit.
Information on the built-in EtherCAT port is provided.
This manual provides an introduction and provides
information on the configuration, features, and setup.
NJ/NX-series CPU Unit
Built-in EtherNet/IP™ port
User’s Manual
W506
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Using the built-in EtherNet/IP port
on an NJ/NX-series CPU Unit.
Information on the built-in EtherNet/IP port is provided.
Information is provided on the basic setup, tag data
links, and other features.
NJ/NX-series
Troubleshooting Manual
W503
NX701-@@@@
NX502-@@@@
NX102-@@@@
NX1P2-@@@@
NJ501-@@@@
NJ301-@@@@
NJ101-@@@@
Learning about the errors that may
be detected in an NJ/NX-series
Controller.
Describes concepts on managing errors that may be
detected in an NJ/NX-series Controller and information
on individual errors.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC-SE2
Learning about the operating
procedures and functions of the
Sysmac Studio.
Describes the operating procedures of the Sysmac
Studio.
NX-series
EtherCAT
®
Coupler Unit
User’s Manual
W519 NX-ECC20
Leaning how to use an NX-series
EtherCAT Coupler Unit and
EtherCAT Slave Terminals
The following items are described: the overall system
and configuration methods of an EtherCAT Slave
Terminal (which consists of an NX-series EtherCAT
Coupler Unit and NX Units), and information on
hardware, setup, and functions to set up, control, and
monitor NX Units through EtherCAT.
NX-series
Data Reference Manual
W525 NX-
Referencing lists of the data that is
required to configure systems with
NX-series Units
Lists of the power consumptions, weights, and other NX
Unit data that is required to configure systems with NX-
series Units are provided.
Machine Automation Controller NX1P
39
Applicable Models for Cable Redundancy Function
For more information on applicable models of Cable Redundancy function, refer to the Applicable Models of Cable Redundancy Function (Cat. No.
R200).
NX-series
NX Units
User’s Manuals
W521
NX-ID
NX-IA
NX-OC
NX-OD
NX-MD
Learning how to use NX Units.
Describe the hardware, setup methods, and functions
of the NX Units.
Manuals are available for the following Units.
Digital I/O Units, Analog I/O Units, System Units,
Position Interface Units, Communications Interface
Units, Load Cell Input Unit, and IO-Link Master Unit
W522
NX-AD
NX-DA
W566
NX-TS
NX-HB
W523
NX-PD1
NX-PF0
NX-PC0
NX-TBX01
W524
NX-EC0
NX-ECS
NX-PG0
W540 NX-CIF
W565 NX-RS
W567 NX-ILM
NX-series Safety Control Unit
User’s Manual
Z930
NX-SL
NX-SI
NX-SO
Learning how to use NX-series
Safety Controls Units
The hardware, setup methods, and functions of the NX-
series Safety Control Unit are described.
NA-series Programmable
Terminal
Software User’s Manual
V118 NA5-W
Learning about NA-series PT
pages and object functions.
Describes the pages and object functions of the NA-
series Programmable Terminals.
NS-series Programmable
Terminals
Programming Manual
V073
NS15-
NS12-
NS10-
NS8-
NS5-
Learning how to use the NS-series
Programmable Terminals.
Describes the setup methods, functions, etc. of the NS-
series Programmable Terminals.
Manual name Cat. No. Model numbers Application Description
Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.
Windows is either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
EtherCAT
®
is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
EtherNet/IP
TM
is the trademarks of ODVA.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
The product photographs and figures that are used in this catalog may vary somewhat from the actual products.
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing
by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE
PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL
SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s
election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof)
the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase
price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any
other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled,
stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any
Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability
or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system
assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in
writing, are not to be construed as an amendment or addition to the above warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.