00198502-02_VD_SIPLACE_Pro_15.1_R18-1_DE_EN.pdf - 第16页
SIPLACE Pro 15.1 (R 18 - 1) / V ersion Description 05/2018 Edition 16 The transfer of noz zle configuration s is supported for the following plac ement heads in th ese direc tions : Nozzle Mapping table – C&P20 - >…
SIPLACE Pro 15.1 (R18-1) / Version Description 05/2018 Edition
15
You can define n dies per wafer to be measured by the Front-Back-Offset Measurement in the
beginning to determine the offset average for this wafer when a wafer is first used in this recipe. It
is also possible to select a 100% Front-Back-Offset Measurement.
The dies which are used for Front-Back-Offset Measurement will be picked-up at first and used to
compute the offset average. The resulting offset is used for all other dies of this wafer to place the
dies correctly.
The Measure offset option has to be enabled in the Component Editor for each die that shall be
measured by the Front-Back-Offset Measurement.
Additionally, the following parameters must be specified:
Count of measurements
Number of individual dies per wafer that shall be measured by the Front-Back-Offset
Measurement to calculate the total die offset to be applied to all other dies of the wafer.
Valid values: 1..100000
Min. valid measurements
Minimum percentage of the measured individual dies per wafer for which the measurement
should be valid. Valid values: 1..100 [%]
Additionally, camera type 40 has to be added to the list of valid camera types for the component in
the Component Shape Editor.
4.8 Copy Feeders and Nozzles Feature – Extension
The Copy Feeders and Nozzles from option in the Setup Editor has been extended to bring a
setup or a nozzle configuration of a placement machine with two processing areas (e.g. an X4i S)
onto two machines with one processing area (TX, TX V2 placement machines). Additionally, the
option has been extended to transfer nozzle configurations of setups with different placement
heads (i.e. from a TX to a TX V2 placement machine).
Two modes are available for copying feeders and nozzles:
Match placement stations when possible
Default mode. If the same placement machine exists in both lines, the feeders and nozzles will
be copied directly to that machine in the target line, regardless of the position of the machine
within the line. The station pairs should preferably have the same number of placing areas
(1 or 2). The number of placement machines must not be the same in the lines. Only nozzle
configurations with the same series are copied.
Maintain placing area order
Feeders and nozzles will be copied by making pairs of placing areas rather than matching
specific placement machines. This can be used to copy from a placement machine with two
placing areas (e.g. an X4i S) to two placement machines each having a single placing area
(e.g. 2x TX V2). Beginning at the first placing area of the source line, feeders and nozzles from
the right-side station location will be copied to the right-side station location of the first placing
area in the target line. Feeders and nozzles from the left-side station location of the source
placing area will be copied to the left-side station location of the matching placing area in the
target line. Feeders and nozzles from station locations with no counterpart in the paired placing
area of the target line will not be copied. The placing areas are matched in the travel direction
of the conveyor.
A nozzle configuration from a placement machine with C&P20 P placement head and 4xxx
nozzles can be copied to a TX V2 placement machine with C&P20 P2 placement head and
6xxx nozzles. The 4xxx nozzles will be transferred to 6xxx nozzles. The nozzle changer type
with its magazine type will also be changed.
SIPLACE Pro 15.1 (R18-1) / Version Description 05/2018 Edition
16
The transfer of nozzle configurations is supported for the following placement heads in these
directions:
Nozzle Mapping table
– C&P20 -> C&P20 P
– C&P20 P -> C&P20 P2.
– C&P20 -> C&P20 P2 (the nozzles will be transferred twice: 1xxx -> 4xxx -> 6xxx).
Configurations of other placement heads (i.e. CPP12, Twin Head) will only be transferred if the
placement head type is the same on the target placement machine.
Restrictions
– Feeders or nozzles will be cut if the space on the target setup is insufficient.
– Custom nozzles will not be transferred.
– Transfers in the other direction, i.e. 6xxx -> 4xxx and 4xxx -> 1xxx are not possible.
– Fixed nozzle configurations of the placement head are not transferred.
4.9 CAD Data Import – Supported Formats
SIPLACE Pro supports the Gerber RS-274-X format for the CAD Data Import.
NOTICE
The compatible extension format Gerber X2 is currently not supported.
4.10 LED Pairing – Separate Package in SIPLACE Pro Installation
LED Pairing is now offered to be installed as a separate package within the SIPLACE Pro setup
wizard.
All files required by LED Pairing can be installed without installing SIPLACE Pro Desk and the Line
Control GUI. Thus the user cannot start SIPLACE Pro Desk accidentally and perform potentially
unwanted changes to the SIPLACE Pro data. Please refer to the SIPLACE Pro Installation Manual,
item no. [00198503-xx].
SIPLACE Pro 15.1 (R18-1) / Version Description 05/2018 Edition
17
5 Features of SIPLACE Pro 15.0
If not differently described, the features of the previous SIPLACE Pro versions are contained in
SIPLACE Pro 15.0. The main features of SIPLACE Pro 15.0 are listed below.
NOTICE
Detailed information on the individual functions can be found in the Online Help for
SIPLACE Pro.
5.1 New Fixed Rail Positions
Some fixed rail positions on SIPLACE TX-series placement machines do not match the
correspondent positions on other SIPLACE placement machines (SX / X / X S / DX / CA series).
For compatibility reasons, the following changes have been made in SIPLACE Pro:
– On SIPLACE TX-series placement machines, the existing fixed rail positions 268.0 and 281.0
have been renamed to 268.0 SMEMA and 281.0 SMEMA.
– On the other SIPLACE placement machines, the fixed rail positions 268.0 SMEMA and 281.0
SMEMA have been added to the existing positions 268.0 and 281.0. The new positions should
be used in mixed lines with SIPLACE TX-series placement machines.
5.2 Making Equal Cycle Times for Left and Right Lane
The procedure for borrowing performance between the placement areas has been improved. It is
now possible to achieve the same cycle time for both board sides if the top and bottom side of a
board shall be placed within one line.
Usually, this will be used if the board top and board bottom sides have a different amount of
placements. One board would be finishing clearly earlier than the other board. To compensate this
behavior this new feature will help.
For this, the two board sides have to be inserted in one recipe and each board side has to be
assigned to one side of the line respectively (left / right). Additionally, the Make equal cycle times
for left and right lane option has to be enabled in the Recipe Editor.
The optimizer will use the asynchronous placement areas to make a kind of balancing between the
two boards. In the result view, the two board sides of the recipe are displayed together. The cycle
times of the two board sides are displayed in different colors.