wire-bonder.pdf - 第31页

WEST•BOND MODEL 454647E SER IES INSTRUCTION MANUAL 25 OPERATION More Options As if 8 was pressed in Align Menu 1 Device 1 of 30 0=Model Selection 2=Go To 3=Home menu 4=Edit 5=Info 6=Thread/Bond-off 8=Toggle Mode 9=Scan ϑ…

100%1 / 126
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
24
OPERATION
Align Menu or “Home” Menu
The following messages are displayed by the 454647E during operation. The rectangles on the left
represent the LCD and examples of its contents. The key format at the bottom of the page indicates the
key functions available when viewing the screen described.
ALIGN MENU 1 for alignment of the critical bond of any given bond sequence. (This is the default mode,
also called “Home” Menu.
D
ISPLAY IN 4500E AND 4600E MODES
ALIGN BOND 1 of 5 USE MICROSCOPE.
Device 1, Type 2, Wire 1
7=Lock X 8=More options 9=Monitor
A=Feed 0=Manual bond G=Full-Auto
DISPLAY IN 4700E MODE
ALIGN BOND 1 of 5 USE MICROSCOPE.
Device 1, Type 2, Wire 1
7=Lock X 8=More options 9=Monitor
A=Torch 0=Manual bond G=Full-Auto
Key Format:
1
Go To
Device/Type
2
Home
3
Edit
4
Info
5
Thread
Or
Bond-off 6
Lock / Move
X Axis
7
More
Options
8
Microscope /
Monitor
9
Feed
A
Manual
Bond
0
Half-
Or
Full-Auto G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
25
OPERATION
More Options
As if 8 was pressed in Align Menu 1
Device 1 of 30 0=Model Selection
2=Go To 3=Home menu
4=Edit 5=Info 6=Thread/Bond-off
8=Toggle Mode 9=Scan
ϑ To call “More Options”
From the H
OME menu press 8
Key Format:
Help
1
Go To
Device/Type
2
Home
3
Edit
4
Info
5
Thread or
Bond-off
6
Previous
wire
7
Toggle
Auto mode
8
Next wire
9
Previous
Menu
A
Toggle
Mode
0
Scan
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
26
OPERATION
Information
To see this menu, press and hold key 5 in the More Options Menu.
Model 454647E,“Version 5.50” -->4500
West Bond Inc.
IN MOST MENUS
1=Escape 2=Go To 3=Home
Go to previous menu upon release of key 5. This
screen is also seen briefly during power-up.
Model 454647E,“Version 5.50”-Aug 10,2000
West Bond Inc.
IN MOST MENUS
1=Escape 2=Go To 3=Home
If key 5 is held for 5 seconds the Software date will
replace the model number in the upper right corner
ϑ To call “Info”
From the M
ORE OPTIONS menu press and hold key 5
Key Format:
Escape
1
Go To
Device/Type
2
Home
3
4
5
6
7
8
9
A
0
G