wire-bonder.pdf - 第87页
WEST•BOND MODEL 454647E SER IES INSTRUCTION MANUAL 81 ADVANCED PROGRAMMING Edit Ultrasonic Time From this menu the operator can increase or decr ease the Ultrasonic Time applied to the wire for bonding. The scale is 000 …
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
80
ADVANCED PROGRAMMING
Edit Ultrasonic Power
From this menu the operator can increase or decrease the Ultrasonic Power applied to the wire for
bonding. The scale is 000 (no ultrasonic power) to 999 (full ultrasonic power). The built-in ultrasonic
generator has a high/low switch to allow the operator a wider range of bonding possibilities. The low scale
has a finer resolution and a maximum output of 2 watts. The high scale has a maximum output power of
4.5 watts. See page 119 for details regarding this board mounted select switch.
EDIT ULTRASONIC POWER
ULTRASONIC POWER, Bond 5: 240
4=Key in 5=Increase 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev menu 0=Decrease G=Next option
To edit “Ultrasonic Power”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), then 4 (ULTRASONIC POWER)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
Key in
4
↑
Increase
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Menu
A
↓
Decrease
0
Next option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
81
ADVANCED PROGRAMMING
Edit Ultrasonic Time
From this menu the operator can increase or decrease the Ultrasonic Time applied to the wire for
bonding. The scale is 000 ms to 999 ms.
EDIT ULTRASONIC TIME
ULTRASONIC TIME, Bond #5: 15 msecs
4=Key in 5=Increase 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Decrease G=Next option
To edit “Ultrasonic Time”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), then 5 (ULTRASONIC TIME)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
Key in
4
↑
Increase
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Option
A
↓
Decrease
0
Next
Option
G
WEST•BOND MODEL 454647E SERIES INSTRUCTION MANUAL
82
ADVANCED PROGRAMMING
Edit Bond Force
This menu is only available if the Dual Force option has been selected. This menu will allow the operator
to specify whether a bond should receive High or Low force. This can be changed from bond to bond.
EDIT BOND FORCE
FORCE for Bond #5: High
5=High 6=Copy
7=Prev bond 8=Suggest 9=Next bond
A=Prev option 0=Low G=Next option
To edit “Bond Force”
From the H
OME menu press 4 (EDIT), A (BOND EDIT), 4 (EDIT BOND), then 6 (FORCE)
Key Format:
Previous
Menu
1
Go To
Device/Type
2
Home
3
4
High
5
Copy
6
Previous
bond
7
Suggest
8
Next bond
9
Previous
Option
A
Low
0
Next option
G