9018-18076.pdf.pdf - 第19页
Keysight i3070 Series 5 In-Circuit Test System Site Preparation 3 Structural Requirements Flo or R eq uir em ents 3 -2 Moving Access Requir ements 3-3 Storage Space Requirements 3-5
2-6 Site Preparation
2 Planning
3-2 Site Preparation
3 Structural Requirements
Floor Requirements
The system tester (testhead and support bay, if included) is the heaviest part of the system. The
controller and test development stations present no special load-bearing concern. The following table
lists the approximate weights of fully-loaded systems.
Anti-Static Surface
Static electricity is destructive to your production process and to your board test system. Careless
handling and poor planning can cost you yield and system reliability.
This is not an exhaustive description of anti-static precautions but a reminder as you plan your system
area:
• Anti-static flooring. Plan to use an anti-static floor covering or mats.
• Grounding straps. Plan for foot straps in conjunction with anti-static flooring and wrist straps for
system operators. The testhead has external connectors for wrist straps.
• Anti-static DUT storage. Plan for anti-static tote bins for your devices-under-test and storage for
anti-static bags.
Table 3-2 System weights
System Type Product Weight
i307x
4-module system
Testhead 429 kg (945 lb)
Testhead on pallet 525 kg (1160 lb)
Maximum Point Floor Loading (each leg) 275 kg (600 lb)
Support Bay Support Bay 209 kg (460 lb)
Support Bay on pallet 277 kg (610 lb)
Maximum Point Floor Loading (each leg) 185 kg (400 lb)
i317x
2-module system
Testhead 429 kg (945 lb)
Testhead on pallet 525 kg (1160 lb)
Maximum floor point loading each leg 275 kg (600 lb)
i327x plus
2-module small footprint system
Testhead 394 kg (868 lb)
Testhead on pallet 593 kg (1307 lb)
i327x
1-Module System
Testhead 340 kg (750 lb)
Testhead on pallet 477 kg (1050 lb)
Mux system: 34595A or 44904A
off pallet
Instrument rack 182 kg (400 lb)