PatternPro Variable Pitch Guns.pdf - 第16页
12 P/N 1048257_03 2018 Nordson Corporation PatternPro Edition 02/18 Key Components 4 1 5 8 6 23 7 Fig. 2 Key Components of the applicator 1 Applicator Module 2 Nozzle 3 Rotating disk 4 Cordset 5 Solenoid valve 6 Tube t…
11
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Description
The PatternPro pneumatic applicator has a unique rotating disk design (twist
adapter), which enables an applicator module to be pivoted for application of
variable pitch patterns.
The applicator is designed to be configured with the following components:
Applicator modules
Nozzles
Solenoid valves
Cordsets
Glue connector / Filter
Refer to Figure 3 for applicator Configuration Options and Table 3 for
Component Specifications.
Intended Uses
PatternPro applicators are designed for use
in industrial applications that require the deposition of a precise
application of hot melt adhesive onto a moving substrate
with an electrically controlled solenoid valve
with melters, hoses, and pattern controllers designed and manufactured
by Nordson Corporation
NOTE: The applicator should only be connected to approved devices. Use
only new Nordson replacement parts or approved factory refurbished parts.
12
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Key Components
4
1
5
8
6
237
Fig. 2 Key Components of the applicator
1 Applicator Module
2 Nozzle
3 Rotating disk
4 Cordset
5 Solenoid valve
6 Tube to Solenoid valve
7 Applicator body
8 Mounting bracket
Note: Hose connector is located on the back of the applicator.
