PatternPro Variable Pitch Guns.pdf - 第54页

50 P/N 1048257_03  2018 Nordson Corporation PatternPro Edition 02/18

100%1 / 54
48
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Tube (and Fitting) kits for SolidBlue A
Part Description Note
1085964 Kit, Solenoid mounting, small CV, 4-way For Solenoid P/N 1120875
1063251 Kit, Solenoid mounting, large CV, 4-way For Solenoid P/N 1055480
1063251 Kit, Solenoid mounting, large CV, 4-way For Solenoid P/N 1053894
Tube (and Fitting) kits for ClassicBlue zero cavity
Part Description Note
1102143 Kit, Solenoid mounting, AO/SC For Solenoid P/N 1120875
1063229 Kit, Solenoid mounting, large CV, 3-way For Solenoid P/N 1055481
1063229 Kit, Solenoid mounting, large CV, 3-way For Solenoid P/N 1056119
Cordsets
MiniBlue II cordsets
Part Description Note
1103014 Cordset, MBII, T (RTD sensing)
1124315 Cordset, MBII, W (RTD Water resistant)
1124172 Cordset, Freedom, F (Freedom standard RTD)
1124172 Cordset, Freedom, D (Freedom Water resistant, RTD)
SolidBlue S cordsets
Part Description Note
223826 Cordset, 2300 w/eyelet, T (RTD sensing)
223804 Cordset, water wash w/eyelet, W (RTD Water resistant)
SolidBlue A cordsets
Part Description Note
223826 Cordset, 2300 w/eyelet, T (RTD sensing)
223804 Cordset, water wash w/eyelet, W (RTD Water resistant)
ClassicBlue zero cavity cordsets
Part Description Note
223826 Cordset, 2300 w/eyelet, T (RTD sensing)
223804 Cordset, water wash w/eyelet, W (RTD Water resistant)
49
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Technical Data
Performance Specifications
Item
MiniBlue II (RC)
(See Notes A, B)
ClassicBlue (ZC)
(See Note B)
SolidBlue
(See Note B)
SureBead
(See Note B)
Operating hydraulic
pressure
103 bar (1,500 psi) maximum
Operating air
pressure
3.4-5.5 bar
(50-80 psi)
2.8-4.8 bar
(40-70psi)
3.4-5.5 bar
(50-80psi)
2.8-5.5 bar
(40-80psi)
Electrical service 240 VAC, 50/60 Hz
Operating
temperature
205 C (400 F) maximum
Solenoid valve
power supply
24 VDC, high temperature solenoids recommended
NOTE A: Operating hydraulic pressures are application dependent. Factors including hot melt material properties
and product line speed will contribute to establishing optimal working hydraulic pressure.
B: Contact a Nordson representative when using an alternate power supply.
Torque Specifications
Item Torque Specification
Module mounting screws (Allen head) 3.4 Nm (30 in.‐lb)
Reduced cavity nozzles 2.0-2.7 Nm (18-24 in.‐lb)
Saturn nozzles 4.5 Nm (40 in.‐lb)
50
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18