PatternPro Variable Pitch Guns.pdf - 第5页
1 P/N 1048257_03 2018 Nordson Corporation PatternPro Edition 02/18 PatternPro Variable Pitch Applicators Safety Read this section before using the equipment. This section contains recommendations and practices applicab…
2
P/N1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Troubleshooting 31..............................................
Troubleshooting Table 31..........................................
Diagnostic Procedures (DPs) 34.....................................
DP1. Check a Solenoid Valve 34..................................
DP2. Check for a Clogged Nozzle or Module 35......................
DP3. Check a Heater 35..........................................
DP4. Check an RTD 36..........................................
Repair 37........................................................
Replacing a RTD or Heater 37......................................
Replacing the Rotating Disk and Applicator Module 40.................
Parts 42.........................................................
Spare Parts 42....................................................
PatternPro Applicator Parts 43......................................
Reference BOM 44.............................................
Modules 44....................................................
Twist Adapters 45...............................................
Glue Connectors 46.............................................
Solenoids 46...................................................
Tube (and Fitting) kits 47.........................................
Cordsets 48....................................................
Technical Data 50................................................
Performance Specifications 50.....................................
Torque Specifications 50...........................................
1
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
PatternPro Variable Pitch Applicators
Safety
Read this section before using the equipment. This section contains
recommendations and practices applicable to the safe installation, operation,
and maintenance (hereafter referred to as “use”) of the product described in
this document (hereafter referred to as “equipment”). Additional safety
information, in the form of task‐specific safety alert messages, appears as
appropriate throughout this document.
WARNING: Failure to follow the safety messages, recommendations, and
hazard avoidance procedures provided in this document can result in
personal injury, including death, or damage to equipment or property.
Safety Alert Symbols
The following safety alert symbol and signal words are used throughout this
document to alert the reader to personal safety hazards or to identify
conditions that may result in damage to equipment or property. Comply with
all safety information that follows the signal word.
WARNING: Indicates a potentially hazardous situation that, if not avoided,
can result in serious personal injury, including death.
CAUTION: Indicates a potentially hazardous situation that, if not avoided,
can result in minor or moderate personal injury.
CAUTION: (Used without the safety alert symbol) Indicates a potentially
hazardous situation that, if not avoided, can result in damage to equipment or
property.
2
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Responsibilities of the Equipment Owner
Equipment owners are responsible for managing safety information, ensuring
that all instructions and regulatory requirements for use of the equipment are
met, and for qualifying all potential users.
Safety Information
Research and evaluate safety information from all applicable sources,
including the owner‐specific safety policy, best industry practices,
governing regulations, material manufacturer's product information, and
this document.
Make safety information available to equipment users in accordance with
governing regulations. Contact the authority having jurisdiction for
information.
Maintain safety information, including the safety labels affixed to the
equipment, in readable condition.
Instructions, Requirements, and Standards
Ensure that the equipment is used in accordance with the information
provided in this document, governing codes and regulations, and best
industry practices.
If applicable, receive approval from your facility's engineering or safety
department, or other similar function within your organization, before
installing or operating the equipment for the first time.
Provide appropriate emergency and first aid equipment.
Conduct safety inspections to ensure required practices are being
followed.
Re‐evaluate safety practices and procedures whenever changes are
made to the process or equipment.