PatternPro Variable Pitch Guns.pdf - 第19页
15 P/N 1048257_03 2018 Nordson Corporation PatternPro Edition 02/18 Installation Applicators are installed using the following six‐step process: unpack and inspect mount connect the solenoid/air supply connect …
14
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Component Specifications
Table 3 Components Specifications
15
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Installation
Applicators are installed using the following six‐step process:
unpack and inspect
mount
connect the solenoid/air supply
connect the hose
flush
install nozzles (refer to Maintenance)
Refer to Parts at the end of this manual for applicator‐specific parts. For
nozzle, hose, and solenoid parts refer to the appropriate product manuals,
Nordson Adhesive and Sealants Equipment Guide, or contact a Nordson
representative.
Installation Guidelines
Mounting
Mount the applicator such that the nozzle will be as close as possible to
the substrate. Typically, the minimum distance is two times the diameter
of the nozzle orifice.
Ensure that the mounting location provides sufficient clearance around
the rear and side of the applicator to allow for removal of the applicator
body cover.
Mount the applicator on a rigid support to prevent external vibration and
applicator rotation.
Insulate the applicator from the support using the insulation plate
provided with the applicator.
16
P/N 1048257_03
2018 Nordson Corporation
PatternPro
Edition 02/18
Hydraulic and Pneumatic Connections
Use only one fitting to connect the hose to the hose connector on the
applicator.
Insulate the hose‐to‐applicator joint. Insulation cuffs may be ordered
separately.
Use only clean, dry, non‐lubricated air for consistent applicator operation.
Ensure that the plant air supply and regulator provide a minimum of
3.4bar (50 psig) to the applicator solenoid valve.
Unpacking and Inspection
1. Carefully unpack the applicator.
2. Inspect the applicator and check for any damage that may have been
caused during shipping. The applicators are shipped fully assembled.
Applicators ordered with optional features may be shipped with additional
components.