00198235-01_VD_710.0_R16-2_DE_EN.pdf - 第33页

Station S oftware 71 0.0 (R16 - 2) / Version Descript ion 12/2016 Edition 33 TX1/TX 2/TX2i Machine t ype with 1 or 2 gantries and 1 P A TX2 m icron/ TX2i m icr on Machine t ype with 2 ga ntrie s and 1 PA VC Vision com pu…

100%1 / 74
Station Software 710.0 (R16-2) / Version Description 12/2016 Edition
32
9 Important Terms and Abbreviations
CA4 Machine type of the Chip Assembly (CA)-series with 4 gantries
and 2 PAs
C&P Collect & Place
CPP Collect & Place & Pick & Place
DC Dual Conveyor
DX1/DX2 Machine type with 1 or 2 gantries and 1 PA
EDIF Electronic Design Interchange Format
eWLP embedded Wafer Level Process
FCCS Field Camera Calibration System
GUI Graphical User Interface
HFH High Force Head
HW Hardware
MGCU Modular Gantry Control Unit
MHCU Modular Head Control Unit
MTC Matrix Tray Changer
OIS Operator Information System
PA Processing area
PCB Printed circuit board
Placement mode:
2-in-1
When a machine runs in I-Placement mode it is possible to
perform manual operations for one side / gantry.This placement
mode is also called "independent".
Placement mode:
Alternating
Placement mode in a dual gantry placement area, in which both
gantries place components on both boards in a dual conveyor.
First, both gantries place all assigned components on the board
in lane one and then on the board in lane two.
Placement mode:
Borrow
Performance
A line runs in I-Placement mode and to get a balanced
throughput between the left and right conveyor lanes, e.g. the
last machine runs in Alternating mode and places components in
this placement area on the board of the other lane.
Placement mode:
I-Placement
Placement mode in a dual gantry placement area in which each
gantry only places components on the board of the assigned
conveyor lane.
SC Single Conveyor
SC SIPLACE Setup Center (external setup control system)
SW Software
SWS SIPLACE Wafer System
SX1/SX2 Machine type with 1 or 2 gantries and 1 PA
TH Twin Head
TH HF Twin Head High Force
Twin VHF Very High Force Twin Head
Station Software 710.0 (R16-2) / Version Description 12/2016 Edition
33
TX1/TX2/TX2i Machine type with 1 or 2 gantries and 1 PA
TX2 micron/
TX2i micron
Machine type with 2 gantries and 1 PA
VC Vision computer
VCU Vision Control Unit
VHF P&P Very High Force Pick&Place
WLFO Wafer Level Fan-Out, Chip Assembly process
WPC Waffle Pack Changer
X2/X2 S Machine type with 2 gantries and 2 PAs
X3/X3 S Machine types with 3 gantries and 2 PAs
X4/X4 S/
X4 S micron
Machine types with 4 gantries and 2 PAs
X4i/X4i S
X4i S micron
Machine types with 4 gantries and 2 PAs
Station Software 710.0 (R16-2) / Version Description 12/2016 Edition
34
10 Licenses
When using linear algebra, the SIPLACE station software utilizes the Eigen template library.
Eigen is free software and is licensed under the GNU LGPL3+ (http://eigen.tuxfamily.org
).
The license terms for GNU LGPL3+ can be found on the station software product CD in the
(License) directory.