252301 Issue 2.0.pdf - 第116页
GEM Manual for DEK Printers Equipment Va riables I ssue 2.0 June 9th, 2011 page 116 of 156 Category Item Nam e Description and Comm ent s Front Pressure The front squeegee / Pr oflow process defined pressure value (not a…
GEM Manual for DEK Printers Equipment Variables
Issue 2.0 June 9th, 2011 page 115 of 156
1. Parameter Id ;Type U4
2. Parameter Name ;Type A
3. Parameter’s Old Value ;Type A
4. Parameter’s Modified Value ;Type A
…
m.
List of Parameter Ids and names are listed in Appendix A.
7.4.3 Traceability Data
The traceability data is a list of items structured as follows:
Structure: L, m ; m = number of trace items
1. L,3
1. Item name ; Type A
2. Item value ; Type A
3. Item units ; Type A
Possible items are as follows:
Category Item Name Description and Comments
DateTime The date and time the record was created as the
product leaves the machine and the entry is
constructed before being written to the data file.
Product ID The product serial number or identifier. This is
normally the products’ barcode value.
State A string representing the overall state of the
product as it leaves the machine. This provides a
good board/bad board state.
Values “Pass” or “Fail”
State Detail A string that contains the detail of the state
reasoning. For example if the board were rejected
due to a failed inspection operation, it would
contain a message reflecting this.
Product Name The name of the product as defined within the
printer control software.
Batch ID The batch or lot ID associated with the products
being printed.
Machine Serial No. The identifier that uniquely represents the printer
machine.
Machine ID The identifier that represents the printer machine
type
Operator ID The identifier that represents the operator
currently logged into the printer control software.
Line ID An identifier that represents the line the printer
belongs to.
User Defined Field 1
User Defined Field 2
User Defined Field 3
User Defined Field 4
Fixed
User Defined Field 5
Any user-defined fields that are associated with
traceability, disabled user-defined fields are not
included. The title will be the index of the defined
field.
GEM Manual for DEK Printers Equipment Variables
Issue 2.0 June 9th, 2011 page 116 of 156
Category Item Name Description and Comments
Front Pressure The front squeegee / Proflow process defined
pressure value (not actual – SPC Data contains
actual)
Rear Pressure The rear squeegee process defined pressure value
(not actual – SPC data contains actual).
Front Print Speed The process defined front print speed (i.e. the rate
the front squeegee moves when performing the
print stroke). The SPC data contains the actual
value.
Rear Print Speed The process defined rear print speed (i.e. the rate
the rear squeegee moves when performing the
print stroke). The SPC data contains the actual
value.
Print Front Limit The maximum limit the front print stroke can be
started from
Print Rear Limit The maximum limit the rear print stroke can be
started from
Forward X Offset The offset applied in X to the screen when
performing the forward print stroke
Reverse X Offset The offset applied in X to the screen when
performing the rear print stroke
Forward Y Offset The offset in Y applied to the screen during the
front print stroke
Reverse Y Offset The offset in Y applied to the screen during the
rear print stroke
Reverse Theta Offset The angle at which the screen is positioned for the
reverse print stroke
Forward Theta Offset The angle at which the screen is positioned for the
forward print stroke
Separation Speed The rate at which the board is separated from the
screen/stencil.
Separation Distance The distance the separation speed applies to
before separating normally.
Print Gap The gap left between the board and stencil/screen
when printing.
Clean Rate 1 / Cyclone Clean Rate /
Blue Clean Rate
The number of print cycles that the clean 1,
cyclone or blue cleaner operation occurs.
Clean Rate 2 The number of print cycles that the clean 2
operation occurs.
Vortex Clean Rate The number of print cycles that the Vortex clean
operation occurs.
Paste While Clean Indicates if a dispense operation is performed
when a clean operation occurs.
Paste Dispense Rate The number of prints that occur before the paste
dispenser performs a dispense operation.
Alternative Dispense Rate The number of prints that occur before the
alternative dispense operation is performed.
Proflow System Pressure The pressure that was applied to the Proflow unit
when printing
Ball Place App Speed The rate at which the ball placement applicator
moves
Ball Place App Dist The distance the ball placement applicator moves
Ball Place Tbl Dwn Speed The rate at which the table moves down when
using ball placement
Process Parameters
Ball Place Hopper Pressure The pressure applied to the ball placement hopper
X Pre Align Dev Deviation in the x axis for the pre print alignment
Y Pre Align Dev Deviation in the y axis for the pre print alignment
SPC
Theta Pre Align Dev Deviation in the theta angle for the pre print
alignment
GEM Manual for DEK Printers Equipment Variables
Issue 2.0 June 9th, 2011 page 117 of 156
Category Item Name Description and Comments
Board Stretch The board length.
Pre Board Stretch Deviation in the pre print board length stretch
Pre Fid 1 X Align Dev Pre fiducial 1 deviation in the x alignment
Pre Fid 1 Y Align Dev Pre fiducial 1 deviation in the y alignment
Pre Fid 2 X Align Dev Pre fiducial 2 deviation in the x alignment
Pre Fid 2 Y Align Dev Pre fiducial 2 deviation in the y alignment
Pre Fid 3 X Align Dev Pre fiducial 3 deviation in the x alignment
Pre Fid 3 Y Align Dev Pre fiducial 3 deviation in the y alignment
X Align Dev Deviation in the X axis alignment
Y Align Dev Deviation in the Y axis alignment
Theta Align Dev Deviation in the theta alignment
Board 1 Fid Score The score of the first defined fiducial on the
board.
Screen 1 Fid Score The score of the first defined fiducial on the
screen.
Board 2 Fid Score The score of the second defined fiducial on the
board.
Screen 2 Fid Score The score of the second defined fiducial on the
screen.
Board 3 Fid Score The score of the third defined fiducial on the
board.
Screen 3 Fid Score The score of the third defined fiducial on the
screen.
Front X Act Rel Move Front X actuator relative movement
Rear X Act Rel Move Rear X actuator relative movement
Act Y Rel Move Y Actuator relative movement
Actual Front Pressure The measured front squeegee / Proflow pressure.
Actual Rear Pressure The measured rear squeegee pressure.
Actual Separation Speed The measured separation speed when performing
the print operation.
Actual Temperature The measured internal temperature
Actual Humidity The measured relative humidity
Cycle Time The number of seconds taken to perform the print
operation.
Table Position The height of the table when at print position.
Post Fid 1 X Align Dev Post fiducial 1 deviation in the x alignment
Post Fid 1 Y Align Dev Post fiducial 1 deviation in the x alignment
Post Fid 2 X Align Dev Post fiducial 2 deviation in the x alignment
Post Fid 2 Y Align Dev Post fiducial 2 deviation in the y alignment
Post Fid 3 X Align Dev Post fiducial 3 deviation in the x alignment
Post Fid 3 Y Align Dev Post fiducial 3 deviation in the y alignment
Front X Act Pos Front X actuator absolute position
Rear X Act Pos Rear X actuator absolute position
Act Y Pos Y actuator absolute position
Actual Front Print Speed The measured print speed variation for the front
squeegee.
Actual Rear Print Speed The measured print speed variation for the rear
squeegee.
Hawkeye Area Error The number of Hawkeye sites in error
Hawkeye Area Warning The number of Hawkeye sites in warning
Hawkeye Feat Error The number of Hawkeye features in error
Hawkeye Feat Warning The number of Hawkeye features in warning
Product Index The name of the verification index that passed the
product identifier validation
Screen ID The value of the identifier (barcode) that is
currently being used for the stencil or screen.
Verification Data
Stencil Screen Index The name of the verification index that passed the
screen or stencil identifier validation