252301 Issue 2.0.pdf - 第79页

GEM Manual for DEK Printers SECS II Implementation I ssue 2.0 June 9th, 2011 page 79 of 156 S2F43 Reset Spooling Streams and Functions (RSSF) S2F44 Reset Spooling Acknowl edge (RSA) Description: This message allows the h…

100%1 / 156
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 78 of 156
S2F41 Host Command Send (HCS)
S2F42 Host Command Acknowledge (HCA)
Description: The host requests the equipment to perform the specified remote
command. Valid commands and parameters are listed at appendix A.
A. Host Initiated
Host to equipment: S2F41
Structure: L,2
1. <RCMD>
2. L,n ;n = No. of parameters
1. L,2
1. <CPNAME1>
2. <CPVAL1>
.
.
n. L,2
1. <CPNAMEn>
2. <CPVALn>
Equipment to host: S2F42
Structure: L,2
1. <HCACK>
2. L,n ;n = No. of Bad parameters.
1. L,2
1. <CPNAME1> parameter 1 name
2. <CPACK1> parameter 1 reason
.
.
n. L,2
1. <CPNAMEn>
2. <CPACKn>
B. Equipment Initiated - Not applicable.
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 79 of 156
S2F43 Reset Spooling Streams and Functions (RSSF)
S2F44 Reset Spooling Acknowledge (RSA)
Description: This message allows the host to select specific streams and functions to be
spooled whenever spooling is active.
A. Host Initiated
Host to equipment: S2F43
Structure: L, m ; m = number of streams.
1. L,2
1. <STRID1> ; stream ID
2. L, n ;n = No. of functions
1. <FCNID1>
.
.
2. <FCNIDn>
m. L,2
1. <STRIDm> ; stream ID
2. L, n ;n = No. of functions
1. <FCNID1>
.
.
2. <FCNIDn>
Exceptions:
1. A zero length list m = 0 turns off spooling for all streams and functions.
2. A zero length list n = 0 turns on spooling for all functions within the stream.
Notes:
1. Any stream not included in the message will have spooling turned off.
2. Spooling for stream 1 is not allowed.
3. The equipment must allow the host to spool all primary messages for a stream
(except stream 1).
4. A defined list of functions for a stream in this message will replace any
previously selected functions.
GEM Manual for DEK Printers SECS II Implementation
Issue 2.0 June 9th, 2011 page 80 of 156
Equipment to host: S2F44
Structure: L, 2
1. <RSPACK>
2. L, m ; m = number of streams in error.
1. L, 3
1. <STRID1> ; stream ID
2. <STRACK1> ; error in stream
3. L, n ;n = No. of functions with errors.
1. <FCNID1>
.
.
2. <FCNIDn>
m. L, L, 3
1. <STRIDm> ; stream ID
2. <STRACKm> ; error in stream
3. L, n ;n = No. of functions with errors.
1. <FCNID1>
.
.
2. <FCNIDn>
Exceptions:
1. If RSPACK = 0, a zero length list, m = 0 is given, indicating no streams or
functions in error.
2. A zero length list n = 0 indicates no functions in error for specified stream.
B. Equipment Initiated - Not applicable.