252301 Issue 2.0.pdf - 第152页

GEM Manual for DEK Printers Appendix A I ssue 2.0 June 9th, 2011 page 152 of 156 Remot e Com mand Par ame ters: PP - SELECT Parameters CPNAME (ASCII) DESCRIPT ION CPVAL ty pe min- m ax RECEIVED_FILE_NAME Name of the proc…

100%1 / 156
GEM Manual for DEK Printers Appendix A
Issue 2.0 June 9th, 2011 page 151 of 156
11 Appendix A
11.1 REMOTE COMMANDS
This appendix details the valid commands and parameters that may be sent using the Remote
Command SECS II transaction, S2F41.
The commands and parameter names passed in S2F41 are ASCII, while the parameter values
are numeric or ASCII depending upon the command. The following table lists the valid
commands RCMD for both S2F21 and S2F41.
S2F41 RCMD (ASCII) S2F21 DESCRIPTION
START 0 Start processing with the currently loaded process program.
STOP 1 Stop processing at the end of the current print cycle.
ERASE_LOG 2 Delete all event log data.
ERASE_BATCH 3 Clear all batch data in the management information file.
ERASE_SESSION 4 Clear all session data in the management information file.
RENAME_PRODUCT
5 Rename process program to parameter value.
See parameter table below.
ADJUST_PARAMETER 6 Set process program parameter to new value.
See parameter table below.
CLEAN 7 Clean screen type 1 according to current process program
parameters.
CLEAN_2 none Clean screen type 2 according to current process program
parameters.
PASTE 8 Add paste automatically.
PP-SELECT none Select process program for execution.
See parameter table below.
CHANGE_SCREEN none Load or unload the screen using the method specified by the
parameter. See parameter table below.
KNEAD_PASTE none Use the next board that arrives to perform a paste knead cycle.
PAUSE none Pause print cycle operation running printer. Remote command
START (S2F41) or 0(S2F21) will resume printing. Remote
command STOP (S2F41) or 1(S2F21) will stop processing at
the end of the print cycle.
GEM Manual for DEK Printers Appendix A
Issue 2.0 June 9th, 2011 page 152 of 156
Remote Command Parameters:
PP
-SELECT Parameters
CPNAME (ASCII) DESCRIPTION CPVAL type min-max
RECEIVED_FILE_NAME Name of the process program to use. ASCII
RENAME_PRODUCT Parameters
CPNAME (ASCII) DESCRIPTION CPVAL type min-max
OLD_FILE_NAME The old name of the process program. ASCII
NEW_FILE_NAME The new name of the process program. ASCII
ADJUST_PARAMETER Parameters
CPNAME (ASCII) S2F21 DESCRIPTION CPVAL
type
Range Resol.
ADJUST_PASTE 0 Adjusts paste dispense rate. F8, none 0-100 1
ADJUST_SPEED 1 Adjusts both front and rear print
speeds.
F8, mm/s 2-150 1
ADJUST_FRONT_PRESS 2 Adjusts forward print pressure. F8, Kg 0-20 0.2
ADJUST_REAR_PRESS 3 Adjusts reverse print pressure. F8, Kg 0-20 0.2
ADJUST_GAP 4 Adjusts print gap. F8, mm 0-6 0.025
ADJUST_SEPARATE 5 Adjusts separation speed. F8, mm/s 0.1–20 0.1
ADJUST_CLEAN 6 Adjusts clean screen rate. F8, none
0−100 1
ADJUST_FWD_X 7 Adjusts forward X offset. F8, mm
±1
0.004
ADJUST_FWD_Y 8 Adjusts forward Y offset. F8, mm
±1
0.004
ADJUST_FWD_T 9
Adjusts forward θ offset.
F8, arcsec
±1000
2
ADJUST_REV_X 10 Adjusts reverse X offset. F8, mm
±1
0.004
ADJUST_REV_Y 11 Adjusts reverse Y offset. F8, mm
±1
0.004
ADJUST_REV_T 12
Adjusts reverse θ offset.
F8, arcsec
±1000
2
ADJUST_PROFLOW_PRESS - Adjusts Proflow print pressure. F8, Kg 0-20
0.2
ADJUST_INSP_RATE - Adjusts post print inspection
rate.
F8, none 0-100
1
ADJUST_BATCH_LIMIT - Adjusts batch limit.
0 = continuous operation.
U4, none 0-99999
1
ADJUST_FRONT_SPEED - Adjusts front print speed. F8, mm/s 2-150
1
ADJUST_REAR_SPEED - Adjusts rear print speed. F8, mm/s 2-150
1
CHANGE_SCREEN Parameters
CPNAME =
“CHANGE_METHOD”
DESCRIPTION CPVAL type
CPVAL = “AUTO” Exchange the screen in the printer (if present) with one in the
autochanger. Load the new screen to the position specified
by the process program.
ASCII
CPVAL = “MAN_LOAD” Load the screen in the printer to the position specified by the
process program.
ASCII
GEM Manual for DEK Printers Appendix B
Issue 2.0 June 9th, 2011 page 153 of 156
12 Appendix B
Operator instructions for configuring and using GEM on DEK printers.
12.1 Network Configuration
The GEM IP Address for the machine must be set up in the DekSECSII.cfg file, this can be checked
and edited if necessary in the configuration file D:\Program
Files\DEK\MachineControl\Printer\DekSECSII.cfg.
Set the PASSIVE ENTITY IP ADDRESS to the printer’s IP Address.
The IP Address can be obtained by using the ipconfig command at the command prompt.
If there is more than one printer communicating with the GEM host, set the DEVICEID differently for
each printer. The default value is 0x109 (265). Alternate DEVICEID values should be chosen within
the range 0x0000 – 0x7FFF (0 – 32767).
12.2 Enabling GEM
Classic User Interface
From the Ready page:
1. Select Maintenance (F8)
2. Select Set Prefs (F5)
3. Change the value of Host Comms to GEM
4. Select Enable Comms (F1).
Instinctiv User Interface
From the Ready page:
1. Select Maintenance
2. Select Machine Setup
3. Select Network
4. Change the Comms Protocol to GEM