252301 Issue 2.0.pdf - 第131页
GEM Manual for DEK Printers Event Messag es I ssue 2.0 June 9th, 2011 page 131 of 156 EVENT - CEID DESCRIPTION 31255 Printer ready . 31256 Head raised. 31257 Head closed. 31260 Cy cle aborte d. 31261 Cy cle completed. 31…
GEM Manual for DEK Printers Event Messages
Issue 2.0 June 9th, 2011 page 130 of 156
EVENT - CEID
DESCRIPTION
31306 Motion control timeout.
31307 Camera X failed to position.
31308 Camera Y failed to position.
31309 Stencil aperture blocked.
31310 Stencil smeared.
31311 Paste on pad inspection error.
31312 Bridging detected by inspection system.
31313 Alignment error detected by inspection system.
31321 Event log disk file full.
31322 Proflow error.
31340 CAN node down.
31341 CAN node recovered.
31342 CAN bus down.
31433 CAN bus recovered.
31460 Volume alarm.
40006 Dongle error.
40028 Roll Height Monitor failed
40043 Knead pressure error (front)
40044 Knead pressure error (rear)
40045 Print pressure error (front)
40046 Print pressure error (rear)
40047 Servo following error
40048 Board fiducial 1 not found
40049 Board fiducial 2 not found
40050 Board fiducial 3 not found
40051 Screen fiducial 1 not found
40052 Screen fiducial 2 not found
40053 Screen fiducial 3 not found
40054 Select mark not found
40056 Bad tooling vacuum
40146 Cleaner detached from camera
40147 Recovered cleaner detached from camera
40150 Ball escape detected
40152 Verification item failed (see DVID 2034)
40157 Product ID verification failed
Start Modification >>>
40200 Material RFID Tag Read Failed
40208 RFID Node Error
40320 Cleaner Vacuum Sense Error
<<< End Modification
9.9 Equipment Specific Information Events
EVENT - CEID
DESCRIPTION
10002 System power on.
31251 Line power on.
31252 Line power off.
GEM Manual for DEK Printers Event Messages
Issue 2.0 June 9th, 2011 page 131 of 156
EVENT - CEID
DESCRIPTION
31255 Printer ready.
31256 Head raised.
31257 Head closed.
31260 Cycle aborted.
31261 Cycle completed.
31262 Cleaning screen.
31263 Parameter adjusted. (See Appendix A)
31264 Setup started.
31272 Setup ended.
31273 Start print cycle.
31275 End print cycle.
31277 Board printed.
31278 Operator log on.
31279 Operator log off.
31280 Clear batch count.
31281 Start maintenance.
31282 End maintenance.
31283 Pressure recalibrated.
31284 Offset recalibrated.
31285 X,Y scale recalibrated.
31286 Theta recalibrated.
31287 Configuration change.
31288 Start diagnostics.
31289 End diagnostics.
31291 Camera reference reset.
31293 Vision height reset.
31294 Print height reset.
31296 Software updated.
31297 New event log.
31301 No cleaner paper.
31302 No cleaner solvent.
31316 Inspection cycle complete.
31317 Clock change request.
31318 Clock changed.
31330 User has enabled the Autoflex tooling.
31331 User has disabled the Autoflex tooling.
31332 System has enabled Autoflex tooling.
31333 System has disabled Autoflex tooling.
31334 Tooling data changed.
31345 Configuration Parameter modified (with change details – see section 9.15)
31347 Adjust Parameter modified (with change details – see section 9.15)
31457 Remote barcode received.
31459 options.enb file attribute error.
40004 Evaluation dongle detected.
40005 Valid dongle detected.
40007 Dongle changed.
40008 Front print speed.
GEM Manual for DEK Printers Event Messages
Issue 2.0 June 9th, 2011 page 132 of 156
EVENT - CEID
DESCRIPTION
40009 Rear print speed.
40020 Maintenance monitoring initialised
40021 Monthly service due
40022 Six monthly service due
40023 Yearly service due
40029 Paste roll height monitoring abandoned
40030 Insufficient paste roll height
40031 Insufficient print medium dispensed
40042 Vortex cassette expired
40055 ProFlow cassette low
40057 Fast print speed selected
40058 Normal print speed selected
40060 Board unstarved
40061 Board unblocked
40062 Board starved
40063 Board blocked
40064 Clean started
40065 Clean complete
40066 2D Inspection started
40067 2D Inspection complete
40068 Paste dispense started
40069 Paste dispense complete
40070 Paper level low
40073 Event log nearly full
40078 Password attempt succeeded
40079 Password attempt failed
40126 Fiducial setup entered
40127 Fiducial setup ended
40128 Diagnostics ended
40129 Adjust entered
40130 Adjust ended
40131 Adjust while running entered
40132 Adjust while running ended
40151 Verification succeeded (see DVID 2034)
40153 Verification value reset (see DVID 2034)
40154 Verification value restored (see DVID 2034)
40155 Batch/lot ID changed
40156 Product ID verification succeeded
40177 Traceability Data Available
Start Modification >>>
40201 Current Material UID Changed
40202 Tag Read Succeeded - Material Identity
40203 Tag Read Failed - Material Identity
40204 Material Verification State Changed
40205 Material Verification Succeeded
40206 Material Verification Invalid
40207 Material Verification Overridden