00192231-09_VD_SSW 407.05_de en.pdf - 第73页

Software Version Description, Station Software Version 407.05 07/2008 Edition  Setup page "PCI Setup" +----------------¦ PCI Setup +---------------+ ¦ +--------------------------+ ¦ ¦ ¦ MultiMedia Enable: [ ] …

Software Version Description, Station Software Version 407.05 07/2008 Edition

 Setup page "Advanced Chipset"

+---------------------------¦ Advanced Chipset +----------------------------+

¦+-DRAM Timing-----------------------++-DRAM Error--------++--------------+ ¦

¦¦ ¦¦ ¦¦ +------+ ¦ ¦

¦¦ DRAM Speed: (*) 60 ns ¦¦ ¦¦ ¦ OK ¦ ¦ ¦

¦¦ ( ) 70 ns ¦¦ (*) None ¦¦ +------+ ¦ ¦

¦¦ ( ) User defined ¦¦ ( ) Parity ¦¦ +------+ ¦ ¦

¦¦ ¦¦ ( ) ECC ¦¦ ¦Cancel¦ ¦ ¦

¦¦ DRAM Read Burst: x222/x333 ¦¦ ¦¦ +------+ ¦ ¦

¦¦ DRAM Write Burst: x222 ¦¦ (*) Multiple ¦¦ ¦ ¦

¦¦ Fast RAS to CAS Delay: 3 Clocks ¦¦ ( ) Single ¦¦ +-------+ ¦ ¦

¦¦ Leadoff: 6 Cl-Rd, 5 Cl-Wr, 3 RAS ¦¦ ¦¦ ¦Default¦ ¦ ¦

¦¦ ¦¦ ¦¦ +-------+ ¦ ¦

¦+-----------------------------------++-------------------++--------------+ ¦

¦+-I/O Recovery Times----------------++-Miscellaneous---------------------+ ¦

¦¦ ¦¦ ¦ ¦

¦¦ 8 Bit Cycles: +1 Clock ¦¦ [v] Enable Memory Hole at 15-16MB ¦ ¦

¦¦ 16 Bit Cycles: +1 Clock ¦¦ ¦ ¦

¦¦ ¦¦ ¦ ¦

¦+-----------------------------------++-----------------------------------+ ¦

¦ Press [F1] key for help ¦

+---------------------------------------------------------------------------+

Miscellaneous

Enable Memory Hole

at 15-16MB

Address window for SIPLACE GEM option

 Setup page "Peripherals"

+------------------------¦ Peripherals +------------------------+

¦ ¦

¦ +-Serial / Parallel Ports-----------------------+ ¦

¦ ¦ Serial Port A: 3F8h, IRQ4 ¦ +------+ ¦

¦ ¦ Serial Port B: 2F8h, IRQ3 ¦ ¦ OK ¦ ¦

¦ ¦ Parallel Port: 378h, IRQ7 Bidirectional ¦ +------+ ¦

¦ +-----------------------------------------------+ ¦

¦ +-IDE / Floppy Controller-----------------------+ +------+ ¦

¦ ¦ Primary IDE: Enabled ¦ ¦Cancel¦ ¦

¦ ¦ Secondary IDE: Disabled ¦ +------+ ¦

¦ ¦ Floppy Disks: Enabled Normal ¦ ¦

¦ +-----------------------------------------------+ +-------+ ¦

¦ +-Miscellaneous---------------------------------+ ¦Default¦ ¦

¦ ¦ PS/2 Mouse: Enabled ¦ +-------+ ¦

¦ +-----------------------------------------------+ ¦

¦ Press [F1] key for help ¦

+---------------------------------------------------------------+

72 of 104

Software Version Description, Station Software Version 407.05 07/2008 Edition

 Setup page "PCI Setup"

+----------------¦ PCI Setup +---------------+

¦ +--------------------------+ ¦

¦ ¦ MultiMedia Enable: [ ] ¦ +------+ ¦

¦ +--------------------------+ ¦ OK ¦ ¦

¦ +--------------------------+ +------+ ¦

¦ ¦ PCI INT IRQ ¦ +------+ ¦

¦ ¦ A: 7 ¦ ¦Cancel¦ ¦

¦ ¦ B: NONE ¦ +------+ ¦

¦ ¦ C: NONE ¦ +-------+ ¦

¦ ¦ D: NONE ¦ ¦Default¦ ¦

¦ +--------------------------+ +-------+ ¦

¦ Press [F1] key for help ¦

+--------------------------------------------+

PCI-Interrupt-Routing

For each PCI INT (= motherboard INT) an IRQ can now be defined in the setup fields.

Since the LAN card of the M54 module is designed as a PCI card, PCI INT A is required.

In Setup, IRQ 7 is to be entered for PCI INT A. During start-up, BIOS will then assign this IRQ to the PCI

card.

 Setup page "IMC Interrupts"

+---------------------¦ IMC Interrupts +------------------------+

¦ ¦

¦ +-----------------------------------------------+ +------+ ¦

¦ ¦ PC-IRQ IRQ-Source IRQ-Mode ¦ ¦ OK ¦ ¦

¦ ¦ 3 onboard COM transparent ¦ +------+ ¦

¦ ¦ 4 onboard COM transparent ¦ +------+ ¦

¦ ¦ 5 MISC_INT transparent ¦ ¦CANCEL¦ ¦

¦ ¦ 6 onboard Floppy transparent ¦ +------+ ¦

¦ ¦ 7 not assigned transparent ¦ +-------+ ¦

¦ ¦ 10 SMP_INT5 transparent ¦ ¦Default¦ ¦

¦ ¦ 11 SMP_INT6 transparent ¦ +-------+ ¦

¦ ¦ 14 onboard IDE transparent ¦ ¦

¦ +-----------------------------------------------+ ¦

¦ ¦

¦ Press [F1] key for help ¦

+---------------------------------------------------------------+

This setup page is used to set the electronic interrupt matrix.

73 of 104

Software Version Description, Station Software Version 407.05 07/2008 Edition

 Setup page "COM Redirection"

+---------¦ COM Redirection +-----------+

¦ ¦

¦ +-Status-------------------+ +------+ ¦

¦ ¦ ( ) disabled ¦ ¦ OK ¦ ¦

¦ ¦ (*) enabled ¦ +------+ ¦

¦ ¦ ( ) enabled (ANSI/VT100) ¦ +------+ ¦

¦ +--------------------------+ ¦Cancel¦ ¦

¦ +-Baudrate-----------------+ +------+ ¦

¦ ¦ ( ) 9600 Bd ¦ ¦

¦ ¦ (*) 19200 Bd ¦ ¦

¦ ¦ ( ) 38400 Bd ¦ ¦

¦ +--------------------------+ ¦

¦ +-Mode------------------------------+ ¦

¦ ¦ (*) Autoredirection ¦ ¦

¦ ¦ ( ) Redirect on Request only ¦ ¦

¦ +-----------------------------------+ ¦

¦ Press [F1] key for help ¦

+---------------------------------------+

 Setup page "IMC Miscellaneous"

+-----------------¦ IMC Miscellaneous +----------------+

¦ ¦

¦ +-Keyboard-------------------------------+ +------+ ¦

¦ ¦[ ] Disable CTRL-C/CTRL-BREAK ¦ ¦ OK ¦ ¦

¦ ¦[ ] Force Cold boot on CTRL-ALT-DEL ¦ +------+ ¦

¦ +----------------------------------------+ +------+ ¦

¦ +-BIOS-E-Segment-------------------------+ ¦Cancel¦ ¦

¦ ¦[v] Disable BIOS E-Segment at boot ¦ +------+ ¦

¦ +----------------------------------------+ ¦

¦ ¦

¦ Press [F1] key for help ¦

+------------------------------------------------------+

BIOS-E-Segment

Disable BIOS

E-Segment at boot

If this option is activated, the E-segment of the BIOS will be deactivated prior

to booting. Any access in this area will be passed on to the PCI bus and thus

to the ISA or SMP16 bus.

(Interface to axis controller boards)

74 of 104