444CEMM1.pdf - 第117页
Page 1-55 REGULAR MAINTENANCE 1 444C-E-MMA01-A07-06 Check Every 140 Hours (Once a Week) 6. Lubricate the Z-axis ball screw through the grease nipple. [Grease : SHELL ST AMINA GREASE RL2] 7. Press UNLOCK + Run . 8. Lubric…
Page 1-54
Check Every 140 Hours (Once a Week)
Procedure for CM201-DH/DS, CM202-DH/DHU/DK/DS
1. Select the operation table.
2. Press
UNLOCK
+ Grease up posi .
• Each axis moves to the grease application
position.
3. Ensure that there is nothing put under
the head and press Yes .
• The Z axis moves down to the grease applica-
tion position.
4. Turn OFF the servo switch.
5. Open the safety cover.
To the next page
444C-418E
Transfer head
2
1
OFF ( )
ON ( )
SERVO
444C-E-MMA01-A07-05
Page 1-55
REGULAR
MAINTENANCE
1
444C-E-MMA01-A07-06
Check Every 140 Hours (Once a Week)
6. Lubricate the Z-axis ball screw
through the grease nipple.
[Grease : SHELL STAMINA GREASE RL2]
7. Press
UNLOCK
+ Run .
8. Lubricate the Y-axis linear bearing
and Y-axis ball screw on the rear side
through the grease nipple.
[Grease : Stamina Grease RL2]
To the next page
444C-418E
4H4C-509P
4H4C-510P
Grease nipple for
linear bearing
Grease nipple for
linear bearing
Grease nipple for
ball screw
To the next page
Grease nipple
444C-523P
444C-EEn-MpMmMm-015
444C-418E
Page 1-56
444C-E-MMA01-A07-02
Check Every 140 Hours (Once a Week)
To the next page
9. Lubricate the Y-axis linear bearing
and Y-axis ball screw on the front side
through the grease nipple.
[Grease : Stamina Grease RL2]
Grease nipple for linear bearing
444C-418E
4H4C-509P
4H4C-510P
Grease nipple for
linear bearing
Grease nipple for
ball screw