444CEMM1.pdf - 第62页
Page 50 444C-E-XXA00-A05-00 = MEMO =
Page 49
444C-E-XXA00-A05-00
Maintenance position
This manual is for CM201 and CM202 in common.
The operating procedure is mainly described for CM202 AF. Basically, carry out the same
maintenance as CM202 AF for CM202 BF, AR, and BR and CM201 AF and AR.
HOW TO SEE DESCRIPTION FOR OPERATION
Remarks
They do not depend on a line flow
direction.
They depend on a line flow direction.
At the upstream line, H1 and H2 are shown.
CM202
CM201
444C-422E
A stage
Rear side
Front side
B stage
AR
BR
AF
BF
A stage
Rear side
Front side
444C-423E
AR
AF
444C-120E
444C-120E
444C-120E
444C-119E
444C-121E
444C-119E
or
or
or
Flow direction
Machine display
Screen display
Left to Right
Right to Left
Page 50
444C-E-XXA00-A05-00
= MEMO =
Page 1-1
444C-E-MMA01-A01-03
Chapter 1
REGULAR MAINTENANCE
Regular maintenance
This chapter describes the regular maintenance of this machine.
The characteristics of the regular maintenance of this machine are that you can carry
out the maintenance based on the run time.
It enables the machine to run in a more stable condition.
This chapter is constructed as follows.
1-1 Outline of Maintenance
The maintenance period and entering the “Maintenance Motions” screen
to be used for operation are described.
The list of check item for each period and unit is also shown.
1-2 Lubricating
How to use the grease gun and greasing points are described.
1-3 to 1-9 Details of Operation for Each Period
Details of maintenance are described for each period.
Before maintenance
Remove such chip supply units as the tape feeder and the bulk feeder before the maintenance.