444CEMM1.pdf - 第59页
Page 47 NOTICE This manual is created for CM201-D, CM201-DU, CM201-DH, CM201-DS, CM202-D, CM202-DU, CM202-DH, CM202-DHU, CM202-DK, CM202-DS. Therefore it mainly uses the illustrations and screens of CM202-DH for descript…
Page 46
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but the basic structure is as follows.
1-1-1 Starting Production
1. Press
Production
.
•“Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following mark are used for description.
Title
Title
Actual operation
Actual operation
Supplementary description
Supplementary description
Operation step number
Operation step number
: Shows operation flow.
: Shows a reference item.
: Shows the operation for engineers.
:Shows the operation for operators.
: Shows pressing a key on the touch
panel.
: Means pressing
UNLOCK
and then
START
on the operating panel within
2 seconds.
: Means pressing B key while
holding A key.
UNLOCK
START
A B
+
Engineer
Return
Operator
444C-E-XXA00-A05-01
Page 47
NOTICE
This manual is created for CM201-D, CM201-DU, CM201-DH, CM201-DS, CM202-D,
CM202-DU, CM202-DH, CM202-DHU, CM202-DK, CM202-DS.
Therefore it mainly uses the illustrations and screens of CM202-DH for description.
HOW TO SEE DESCRIPTION FOR OPERATION
It has two sets of mounting stage.
• It mounts two boards at the same time.
• Up to 104 feeders can be set.
CM201-D
Front view
Rear view
It has a set of mounting stage.
• It mounts boards one by one.
• Up to 52 feeders can be set.
444C-101E
444C-102E
4F4C-AA00
4F4C-AB02
External view Features
Front view
CM201-901E
Rear view
CM201-902E
CM201-DU
CM202-D
Front view
Rear view
444C-AA00 444C-AB00
Front view
4Q4C-901E
Rear view
4Q4C-902E
CM202-DU
Conveyor cover
Conveyor cover
444C-E-XXA00-A05-00
Page 48
∗ For further information about the specification, see “1-3 Equipment Specification” in the Operating Manual.
444C-E-XXA00-A05-00
HOW TO SEE DESCRIPTION FOR OPERATION
CM202-DH/DK
Front view Rear view
4U4C-AA00
4U4C-AB01
External view Features
Front view
4U4C-901EU
Rear view
4U4C-902EU
CM202-DHU
Conveyor cover
It has two sets of mounting stage.
• It mounts two boards at the same time.
• Up to 104 feeders can be set.
444C-102E
NOTICE
It is dangerous to operate the DU and the DHU while the feeder base cover and the
conveyor cover are removed.
Be sure to set the feeder base cover and the conveyor cover during operation.
CM201-DH/DS
Front view Rear view
It has a set of mounting stage.
• It mounts boards one by one.
• Up to 52 feeders can be set.
444C-101E
E14C-AA00
E14C-AB00
CM202-DS
Front view
Rear view
E24C-AA00
E24C-AB01
( The illustration of CM201-DH is used.)