444CEMM1.pdf - 第48页
Page 36 SAFETY PRECAUTIONS Be sure to observe The labels for safety pasted on the product 444C-E-XXA00-A04-00 When the Cutting Unit is Installed The following warning labels are pasted on the machine. Follow the instruct…
Page 35
SAFETY PRECAUTIONS
Be sure to observe
0 A 5 F B
WARNING
TAKE CARE NOT
TO TOUCH CUTTER
You will have serious
injury if you touch
cutter.
0 A 5 F B
WARNING
TAKE CARE NOT
TO TOUCH CUTTER
You will have serious
injury if you touch
cutter.
CM202-DHU (Warning labels)
The following warning labels are pasted on this machine. Follow the instructions on each label. If a label has
come off, put a new one on a proper position. To order a label from the manufacturer, refer to PARTS LIST.
Label part No.
0 1 J Q B
feeder tables will have
serious injury.
The labels for safety pasted on the product
444C-E-XXA00-A04-00
The positions of warning labels on the front side
4U4C-908EU
The positions of warning labels on the rear side
0 1 P 9 B
WARNING
DO NOT DISABLE
SAFETY SENSOR
You will have serious
injury by active part
if you disable safety
sensor.
0 1 P 9 B
WARNING
DO NOT DISABLE
SAFETY SENSOR
You will have serious
injury by active part
if you disable safety
sensor.
0 1 N L B
WARNING
WORKER
OPERATING
IN THE FRONT
Make sure that no
worker is in the front
when machine
starting.
０１ＪＫＡ
0 1 N M B
WARNING
WORKER
OPERATING
IN THE BACK
Make sure that no
worker is in the back
when machine
starting.
０１ＪＫＡ
4U4C-909EU
０１ＪＫＡ
０１ＪＫＡ
Figure seen from A
444C-127E
A
B
444C-128E
Figure seen from B
0 D P 3 A
TURN OFF THE POWER AND
AIR BEFORE TOUCHING
THE CUTTER AREA DURING
MAINTENANCE
You may potentially
be injured by the
cutter area if the
machine is actuated.
WARNING
Page 36
SAFETY PRECAUTIONS
Be sure to observe
The labels for safety pasted on the product
444C-E-XXA00-A04-00
When the Cutting Unit is Installed
The following warning labels are pasted on the machine. Follow the instructions on each label.
If a label has come off, put a new one on a proper position. To order a label from the manufacturer, refer to
PARTS LIST. (CM201-D/DU, CM202-D/DU is an option)
The positions of warning labels
(As for the explanation, the illustration of CM202-DH is used.)
Label part No.
0 1 J Q B
feeder tables will have
serious injury.
Cutting unit
Cutting unit cover
4U4C-912E
View seen from A
444C-127E
View seen from B
4H4C-025E
Operation side
4U4C-010E
0 A 5 F B
WARNING
TAKE CARE NOT
TO TOUCH CUTTER
You will have serious
injury if you touch
cutter.
0 1 P 9 B
WARNING
DO NOT DISABLE
SAFETY SENSOR
You will have serious
injury by active part
if you disable safety
sensor.
B
B
A
0 D P 3 A
TURN OFF THE POWER AND
AIR BEFORE TOUCHING
THE CUTTER AREA DURING
MAINTENANCE
You may potentially
be injured by the
cutter area if the
machine is actuated.
WARNING
Page 37
SAFETY PRECAUTIONS
Be sure to observe
About Interlock
444C-E-XXA00-A04-00
About Safety Cover Interlock
1. Basic feature of safety cover interlock
Before starting regular automatic production on this machine, close all safety covers.
Since a screen displays the message prompting you to supply a member when it needs to be
supplied, open the corresponding cover according to the member to be supplied and then conduct
the work.
If you accidentally open a safety cover during automatic production, the machine comes to an
emergency stop to ensure the safety of operators.
2. How to use servo switch
Since an operator needs to put the hands or part of body into the machine for the purpose of model
changeover or maintenance, the operating panel is equipped with the servo switch in order to
ensure on-the-job safety. When this servo switch is turned OFF, all of the drive shafts of the ma-
chine will be inactive. For information about the operations above, refer to the instruction manuals
for each model.
About Key Switch for Maaintenance
1. Key switch for maintenance at our company
This switch, which is targeted for the technician belonging to our company or the commissioned
maintenance technician, can release all of the safety cover interlocks. It is used for such an exten-
sive maintenance work as you cannot perform.
2. Feature of key switch for maintenance at our company
It is dangerous to use this maintenance key, because the safety cover interlock function will be
disabled and both the hardware and software judge that the safety covers are closed; eventually,
the safety features will be disabled in all modes.
If you need to put your hands or part of body into the machine while the safety cover interlock is
released, be sure to turn OFF the servo switch and restrict each shaft action before work.
3. Handling of maintenance key
We basically do not deliver this maintenance key to you.
If you should make a request for the maintenance key, we will deliver it after exchanging the
certificates of delivery acknowledgement.
In that case, we assume no responsibility for any accidents caused by your unsafe acts, for ex-
ample, releasing the interlock function.
Your safety manager should manage the maintenance key adequately.