444CEMM1.pdf - 第21页
Page 9 SAFETY PRECAUTIONS Be sure to observe 444C-E-XXA00-A03-02 WARNING
Page 8
SAFETY PRECAUTIONS
Be sure to observe
WARNING
CM202-DH/DHU/DK/DS (As for the explanation, the illustration of CM202-DH is used.)
Observe the following items before placing your hand or other part of
your body in an active part of the machine in order to feed production
material, change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric
shock.
There are three levels of procedure, shown below, for each kind of work.
Repairing such as a control BOX. --------------------------------------------- Cut off the power supplying to the
machine.
Turning OFF the power supply routinely------------------------------------- Turn OFF the power supply.
Replacing a control part such as a sensor
Disassembling or replacing parts
Changing production board types or working for daily inspection ----- Turn OFF the servo switch.
Placing a board onto the conveyor or removing one from there
Setting production materials such as feeders
4U4C-AA00
444C-E-XXA00-A03-02
1
2
3
1
2
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
Cut off the power supplying
to the machine.
Turn OFF the
breaker that is
connented to the
machine.
Turn OFF the servo
switch.
Rear panel
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
3
OFF ( )
ON ( )
SERVO
STOP
UNLOCK
STEP
START
LIGHT ON
SELECT
KEY LOCK BACK LIGHT OFF
Turn OFF the servo switch.
Front panel
3
M73EB
Page 9
SAFETY PRECAUTIONS
Be sure to observe
444C-E-XXA00-A03-02
WARNING
Page 10
SAFETY PRECAUTIONS
Be sure to observe
WARNING
L13EB
DO NOT DISABLE
SAFETY SENSOR.
You will have serious injury by
active part if you disable safety
sensor.
Do not remove the sensor,
put any objects in or turn off
the switch so that the safety
sensor work properly and
effectively.
WORKER OPERATING
IN THE BACK.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker behind the machine.
Make sure that no worker is
in the back when machine
starting.
L18EB
WORKER OPERATING
IN THE FRONT.
If you start the machine without
confirming that it is safe to do
so, it may cause injury to the
worker in front of the machine.
Make sure that no worker is
in the front when machine
starting.
L19EB
M09E
TAKE CARE NOT TO
PINCH YOUR HANDS
OR FINGERS.
You will have serious injury if
your hands or fingers are
caught in the conveyors during
manual (or automatic) width
adjustment.
TURN OFF THE
SERVO SWITCH BE-
FORE PLACING A
BOARD ON OR RE-
MOVING IT FROM THE
CONVEYOR.
You will have serious injury if
the machine is actuated.
M35E
L11E
WATCH YOUR HANDS
OR FINGERS.
You will have serious injury if
you touch active part.
444C-E-XXA00-A03-02
L14EB
ELECTRIC SHOCK.
You will have serious electric
shock if you touch electric
active part inside.
TURN OFF THE
POWER AND AIR BE-
FORE TOUCHING THE
CUTTER AREA DUR-
ING MAINTENANCE.
You may potentially be injured
by the cutter area if the ma-
chine is actuated.
L43E