444CEMM1.pdf - 第56页
Page 44 Actual numbers are shown on the plate instead of ∗. SERIAL PLA TE CM202-DS E24C-AB01 Actual numbers are shown on the plate instead of ∗. CM202-DS KXF-E24C CM201-DS KXF-E14C CM201-DS E14C-AB00 444C-E-XXA00-A05-02
Page 43
SERIAL PLATE
4U4C-AB01
CM201-DH
4V4C-AB00
CM202-DK
CM202-DK
KXF-E54C
Actual numbers are shown on the plate instead of ∗.
CM201-DH
KXF-4V4C
444C-E-XXA00-A05-02
Actual numbers are shown on the plate instead of ∗.
Page 44
Actual numbers are shown on the plate instead of ∗.
SERIAL PLATE
CM202-DS
E24C-AB01
Actual numbers are shown on the plate instead of ∗.
CM202-DS
KXF-E24C
CM201-DS
KXF-E14C
CM201-DS
E14C-AB00
444C-E-XXA00-A05-02
Page 45
DISPOSING OF THE AIR SPRING
This machine uses the air spring to open/close covers. It is very dangerous to dispose of it as it is,
because high-pressure air is sealed into it. Before disposing of it, be sure to bleed it of the air.
Removing the air spring
Turn the bolt with hexagonal hole counterclockwise, and remove the spring.
Discharging of the air spring
Drill the spring and discharge the air in it completely.
NOTICE
As crashed chips and oil discharge when the air is coming out, use safety glasses
for protection.
1B4C-442E
1D4C-406E
4U4C-AB00
Bolt with hexagonal hole
Air spring
Position to drill the air spring
15 mm to 20 mm
Hole
Position to use the air spring
ABOUT DISPOSAL OF COMPONENTS CONTAINING MERCURY
NOTICE
This product has a fluorescent lamp that contains a small amount of mercury.
It also contains lead in some components. Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance.
444C-E-XXA00-A05-01