00198045-01_OM_BulkFeeder_X_EN.pdf - 第16页
SIPLACE BulkFeede r X / Operating Ma nual 05/2017 Edition 16 Buttons Buttons Act io n In submenu Forwards Vibrate for wards (batch 1) Increase para meter Backwar ds Vibrate back wards (batch 2) Decrease para meter Open p…
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
15
3.4 Controls and Displays of the Base Unit
The control panel is a 7-segment display.
The SIPLACE BulkFeeder X has a main menu and submenus. After switch-on, the main menu is
automatically displayed.
1. 7-segment display
2. Forwards button
3. Backwards button
4. Remove cartridge button
5. Set button
6. Status display (green after login)
Figure 3-4: Control and display panel
Press the Set and Remove cartridge buttons shortly at the same time (< 2 seconds) to switch ►
over to the submenu.
Press the Set button > 2 seconds to switch over from a standard submenu to an advanced ►
submenu within the menu mode.
The decimal points in the display at the top indicate that the submenu mode is activated.
The submenu mode is automatically terminated if no button has been pressed within 15 seconds.
In this case, a possibly changed value will not be saved.
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
16
Buttons
Buttons Action In submenu
Forwards
Vibrate forwards (batch 1) Increase parameter
Backwards
Vibrate backwards (batch 2) Decrease parameter
Open plate shutter
Close plate shutter
>0,75 sec.: unlock cartridge Save
>2 sec.: scan request Short: next menu
>2 sec.: advanced menus
Display submenu
Figure 3-5: Buttons on SIPLACE BulkFeeder X
Displays
Mode 7 segment display Status LED
Initial state Off Green
Internal feeder error FE or Er
01 01
Red
Station error Off Red
Plate shutter
confirmation
PS + OP (Plate shutter open)
PS + CL (Plate shutter closed)
(is displayed after the green button has been
pressed until the gray button is released)
Corresponds to feeder state
Automatically process
during
removing/inserting
cartridge is running
Corresponds to feeder state
Cartridge unlocked rS
Ou (Ou flashes)
Corresponds to feeder state
Cartridge not inserted
(The indicator flashes)
Corresponds to feeder state
Submenu x.x (x.x = name)
yy (yy = value)
Corresponds to feeder state
Figure 3-6: Displays on SIPLACE BulkFeeder X
SIPLACE BulkFeeder X / Operating Manual 05/2017 Edition
17
Submenus
Menu
type
Menu
no.
7 segment display
at the top
7 segment display at the bottom Buttons
Standard
1 r.S (Reservoir
Shutter)
_0
_1
_2
Shutter undefined
Shutter closed
Shutter open
Open
shutter
Close
shutter
2 P.n (Profile number) _1…10 Number of vibration file to be
loaded
Increase
number
Decrease
number
Accept
setting
3 b.A (Batch number) xx Number of batches loaded by the
station
No function
4 t.E (Temperature) xx Temperature of Coil driver ICs [°C] No function
5 S.L (Slot number) xx FCU slot number (decimal) No function
Figure 3-7: Submenus on SIPLACE BulkFeeder X
3.5 Technical Data
Part Weight Dimensions [LxWxH]
Base Unit: 6 kg 587x35x200 mm
Base Unit + Cartridge: 6.4 kg 587x35x200 mm (occupies 3 tracks)
Cartridge: 0.4 kg 377x34x23 mm (without components)
3.6 EU Declaration of Conformity
The product/device described conforms to the regulations and standards listed in the EU
Declaration of Conformity provided.
Manufacturer:
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Str. 44
D-81379 Munich