YSM10_Mainte_E.pdf - 第123页
4-14 4 Maintenance of options 4.3 6-month inspection 4.3.1 Cleaning and lubricating the AH-axis guide T he following describes the procedures for cleaning and lubricating the AH-axis guide rail. 1 Glean the guide. e 1. P…
4-13
4
Maintenance of options
5
Spread the grease.
1. Close the machine safety cover to
cancel the emergency stop.
2. Press the [Pallet Set] button on the [Unit]
- [Auto TC] screen. Enter the pallet
number "1" in the box of the "Pallet Set"
screen and press the [OK] button. Move
the rack to the pull-out position of the
pallet number 1.
3. The "pallet set error" occurs as the pallet
is not set in the rack. Clear the error.
4. Move the rack to the top by turning the
door switch of sATS15 to the "OPEN" side
and then turn it to the "CLOSE" side.
5. Repeat 2 to 4 procedures 3 times.
54406-KMG-00
6
Wipe away excess grease.
e
1. Press the emergency stop button to open
the safety cover on the rear side of the
machine.
2. Use a lint-free cleaning cloth to wipe
away excess grease from the ball screw
and the ball guides.
7
Return the AZ-axis cover to the
original position.
Spreading grease over AZ-axis
Step 5
[Pallet Set] button
Pull out pallet number 1.
4-14
4
Maintenance of options
4.3 6-month inspection
4.3.1 Cleaning and lubricating the AH-axis guide
The following describes the procedures for cleaning and lubricating the AH-axis guide rail.
1
Glean the guide.
e
1. Press the emergency stop button to open
the safety cover on the rear side of the
machine.
2. Use a lint-free cleaning cloth to wipe
away excess grease or dirt from the
AH-aixs guide.
53410-KMG-00
c
CAUTION
Be sure that the cloth, etc., being used to clean the
AH-axis guide does not produce lint, etc.
2
Inject the grease.
Using a grease gun (bent type), inject the
prescribed grease (NSL) at the AH-axis
grease nipple.
n
NOTE
Inject until the grease begins to seep out from the gap.
53411-KMG-00
3
Spread the grease.
Grab the AH-axis and move it backward
and forward 3 times to spread the grease.
53412-KMG-00
4
Wipe away excess grease.
Use a lint-free cleaning cloth to wipe away
excess grease from the guide and the guide
end faces.
Cleaning AH-axis
Step 1
Cloth
AH-axis guide
Lubricating AH-axis
Step 2
Grease gun
(Bent type nozzle)
Grease nipple
Spreading grease
Step 3
Move AH-axis backward
and forward manually.
Chapter 5 Lubrication points and schedule
Contents
1. Lubrication preparations 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-1
2.
Lubrication points and schedule (Main machine)
5-2
2.1 X-axis 5-2
2.2 Y-axis 5-3
2.3 W-axis 5-4
2.4 PU-axis 5-5
3. Lubrication points and schedule (sATS15) 5-6
3.1 AZ-axis 5-6
3.2 AH-axis 5-7