YSM10_Mainte_E.pdf - 第56页
1-13 1 Maintenance n Precautions when handling grease w W ARNING INFLAMMA TION MA Y OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR LUBRI- CANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR …
1-12
1
Maintenance
2.3.2 Lubricating tools and grease
Lubricating and greasing tools
Parts supplied with machine / Optional Parts
Lithium-based grease NSL
Nozzle buffing lube supply syringe
Grease gun
Standard nozzle
Flexible type nozzle
Bent type nozzle
GREASE GUN SET
53106-KMG-00
n
Lubricating and greasing tools (Parts supplied with machine)
Name Part name Part No. Note
Nozzle buffing lube supply syringe SYRINGE, OIL KV8-M8870-00X Turbine oil VG32
Lithium-based grease GREASE PACK K48-M3856-00X NSL 80g
n
Lubricating and greasing tools (Optional parts)
Name Part name Part No. Note
Grease gun (with standard nozzle) GREASE GUN K48-M3852-00X
GREASE GUN SET
KHW-M3852-A0X
Nozzle (flexible type) GREASE NOZZLE K48-M3857-00X
Nozzle (bent type) GREASE NOZZLE K48-M3854-00X
c
CAUTION
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
issued. Because these part Nos. may be changed without prior notice, be sure to verify the latest part Nos. before
ordering parts.
1-13
1
Maintenance
n
Precautions when handling grease
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT GETS INTO THE EYES. BEFORE HANDLING THE GREASE OR LUBRI-
CANT, WEAR SAFETY GOGGLES TO ENSURE THE GREASE OR LUBRICANT DOES NOT GET INTO THE EYES.
w
WARNING
INFLAMMATION MAY OCCUR IF GREASE OR LUBRICANT COMES INTO CONTACT WITH SKIN. BE SURE TO WEAR PROTECTIVE
GLOVES TO PREVENT CONTACT WITH SKIN.
w
WARNING
DO NOT TAKE ORALLY OR EAT GREASE OR LUBRICANT. EATING WILL CAUSE DIARRHEA AND VOMITING.
c
CAUTION
After use, tightly cap the grease tube to ensure dust, debris and moisture do not enter inside. Store the grease in a
dark location not exposed to direct sunlight and keep it away from fire and heating sources.
1-14
1
Maintenance
2.3.3 Special tools
Special tools
Optional purchase parts
Leaf spring installation tool
ANC nozzle attaching / detaching tool
Nozzles are not attached
Nozzles are attached (facing down)
30x, 31x series nozzles
53107-KMG-00
n
Special tools (Optional purchase parts)
Name Part name Part No. Note
Leaf spring installation tool TOOL, LEAF SPRING KGS-M8810-00X
For details about how to use the
tool, see "2.1 Replacing nozzle leaf
springs" in Chapter 6.
ANC nozzle attaching / detaching
tool
NOZZLE TOOL ANC KLW-M88M0-00X
For details about how to use the tool,
see "1.2 Nozzle cleaning" in Chapter
3.
n
NOTE
Use of the leaf spring installation tool makes it possible to install the leaf springs more uniformly. When you have this
tool, install the leaf springs with this tool.
n
NOTE
ANC nozzle attaching / detaching tool can attach / detach up to 10 nozzles at the nozzle station (option) at once.
30x series and 31x series nozzles are available.
c
CAUTION
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
issued. Because these part Nos. may be changed without prior notice, be sure to verify the latest part Nos. before
ordering parts.
n
NOTE
The leaf spring installation tool is also available for other YAMAHA machines such as Z:LEX (YSM20/YSM20W: HM head
type) and YS series (excluding YS88).