YSM10_Mainte_E.pdf - 第124页
Chapter 5 Lubrication points and schedule Contents 1. Lubrication preparations 5-1 1.1 Compatible grease 5-1 1.2 Grease gun 5-1 2. Lubrication points and schedule (Main machine) 5-2 2.1 X-axis 5-2 2.2 Y -axis 5-3 2.3 W-a…
4-14
4
Maintenance of options
4.3 6-month inspection
4.3.1 Cleaning and lubricating the AH-axis guide
The following describes the procedures for cleaning and lubricating the AH-axis guide rail.
1
Glean the guide.
e
1. Press the emergency stop button to open
the safety cover on the rear side of the
machine.
2. Use a lint-free cleaning cloth to wipe
away excess grease or dirt from the
AH-aixs guide.
53410-KMG-00
c
CAUTION
Be sure that the cloth, etc., being used to clean the
AH-axis guide does not produce lint, etc.
2
Inject the grease.
Using a grease gun (bent type), inject the
prescribed grease (NSL) at the AH-axis
grease nipple.
n
NOTE
Inject until the grease begins to seep out from the gap.
53411-KMG-00
3
Spread the grease.
Grab the AH-axis and move it backward
and forward 3 times to spread the grease.
53412-KMG-00
4
Wipe away excess grease.
Use a lint-free cleaning cloth to wipe away
excess grease from the guide and the guide
end faces.
Cleaning AH-axis
Step 1
Cloth
AH-axis guide
Lubricating AH-axis
Step 2
Grease gun
(Bent type nozzle)
Grease nipple
Spreading grease
Step 3
Move AH-axis backward
and forward manually.
Chapter 5 Lubrication points and schedule
Contents
1. Lubrication preparations 5-1
1.1 Compatible grease 5-1
1.2 Grease gun 5-1
2.
Lubrication points and schedule (Main machine)
5-2
2.1 X-axis 5-2
2.2 Y-axis 5-3
2.3 W-axis 5-4
2.4 PU-axis 5-5
3. Lubrication points and schedule (sATS15) 5-6
3.1 AZ-axis 5-6
3.2 AH-axis 5-7
5-1
5
Lubrication points and schedule
1. Lubrication preparations
1.1 Compatible grease
For greasing procedures, always use the YAMAHA prescribed grease shown below.
c
CAUTION
Using unauthorized grease could damage the machine.
Lube Point Guide Grease
Main unit
X-axis
Ball screw
NSL grease
Guide
Y-axis
Ball screw
Guide
W-axis
Ball screw
Guide
Hexagon spline
PU-axis
Ball screw
Ball guide
sATS15
AZ-axis
Ball screw
NSL greaseBall guide
AH-axis Guide
1.2 Grease gun
The grease gun has 3 interchangeable nozzle types to accommodate the various greasing point configurations.
Always use the prescribed nozzle for the greasing point in question.
Grease gun
Grease gun
30° bent type nozzle
Standard nozzle
The various
nozzle tips are
inserted here
Flexible chuck type nozzle
30°
OD ø14 tip
OD ø10 tip
OD ø0.5 tip
53500-KMG-00
c
CAUTION
Prepare the tip nozzle for grease to be used. If two or more kinds of grease with different characteristics are mixed in
the nozzle and it is applied, this may cause the machine performance to lower.