FlexSeam Dispensing System Customer Product Manual.pdf - 第3页

Table of Contents i Part 1127900_01 E 2019 Nordson Corporation Table of Contents Flexseam Dispensing System 1 ............................... Safety 1 ...................................................... Safety Alert S…

Part 1127900_01

E 2019 Nordson Corporation

Nordson Corporation welcomes requests for information, comments, and inquiries about its products. General information

about Nordson can be found on the Internet using the following address: http://www.nordson.com.

Address all correspondence to:

Nordson Corporation

Attn: Customer Service

11475 Lakefield Drive

Duluth, GA 30097

Notice

This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2019.

Nopartofthisdocument may be photocopied, reproduced, or translated to another language without the prior written

consent of NordsonCorporation. Theinformationcontained in this publication is subject to change without notice.

Trademarks

4800 INTEGRA, Allegro, Apogee, Artiste, Asymtek, Automove, Avex, BaitGun, BKG, Blue Box, BM-32, BM-58, BM-63, Bowtie,

Build‐A‐Part, CF, Century, CleanSleeve, CleanSpray, Color‐on‐Demand, ColorMax, Conexis, Connections to Life, Contour, ControlCoat,

Coolwave, Cross‐Cut, CrystallCut, Dage, Dial‐A‐Dose, Dima, DispenseJet, DispenseMate, DuraBlue, DuraDrum, DuraPail, e.dot,

e-stylized, EasyCoat, Easymelt, Ecodry, Econo‐Coat, EDI, EFD, Eliminator, Encore, Equatherm, Excel 2000, Fibrijet, Flextrak, Fluidmove,

FoamMelt, FoamMelt - stylized, FoamMix, Freedom, Fulfill, HDLV, Heli‐flow, iControl, iDry, iFlow, IntelliJet, Isocore, Iso‐Flo, iTrax, KISS,

LeanCell, LogiComm, March, Matrix, MatriX, Maverick, Measuring the Invisible, MEG, Meltex, MicroCoat, MicroMark, Micromedics,

Micro‐Meter, Microshot, Millennium, MiniBlue, Mini Squirt, NexJet, No-Drip, Nordson, Nordson - stylized, Nordson and Arc, NYTVision,

OptiMix, Optima, Optimum, Package of Values, Paragon, PermaFlo, PICO, PicoPulse Plasmod, Poly-Check, Polymer Solution Casting,

PorousCoat, Posi‐Dose, PowderGrid, Precisecoat, PrintPlus, ProBlue, ProBlue Liberty, Prodigy, Pro‐Flo, Program‐A‐Bead,

Program‐A‐Shot, Program‐A‐Stream, Program‐A‐Swirl, Pro‐Meter, Pulsar, Quantum, Ratio‐Pak, RBX, RediSet, Rhino, Saturn,

Saturn with Rings, Scoreguard, Sealant Equipment & Engineering, Inc., SEE (and design), See‐Flo, SelectCharge, SelectCoat,

Select Cure, Servo‐Flo, Shot‐A‐Matic, Signature - stylized, Slautterback, Smart‐Coat, Smart-Gun, SolderPlus, Spectrum, Speed‐Coat,

StediFlo, Stratablend, SureBead, Sure Coat, SureWrap, Symphony, Tip-Seal, TRAK, Tribomatic, Trilogy, TrueBlue, TrueCoat, Turbo,

Ultra, u‐TAH, Value Plastics, Vantage, Vention Medical, Vention Medical Advancing Your Innovations For Health, VersaBlue, Versa‐Coat,

VersaDrum, VersaPail, Versa‐Spray, VP stylized, When you expect more

., X-Plane, Xaloy, Xaloy - stylized, YesTech, and

2 Rings (design) are registered trademarks of Nordson Corporation.

Accubar, Active Nozzle, Advanced Plasma Systems, AeroDeck, AeroWash, AirShield, AltaBlue, AltaSlot, Alta Spray, ATS, Auto‐Flo,

Autoflex, AutoScan, Axiom, Best Choice, Better Dispensing, Blue Series, Bravura, CanPro, Champion, Check Mate, Classic IX,

ClassicBlue, CleanCoat, Cobalt, Concert, ContourCoat, Control Weave, Controlled Fiberization, CPX, cScan+, cSelect, Cyclo‐Kinetic,

DispensLink, Dry Cure, DuraBraid, DuraCoat, DuraPUR, e.dot+, Emerald, E‐Nordson, Easy Clean, EasyOn, EasyPW, Eclipse, EcoBead,

EdgeControl, Equalizer, EquiBead, FillEasy, FillSentry, FlexSeam, Flow Coat, FluxPlus, G‐Net, G‐Site, Genius, Get Green with Blue,

Horizon, Inspire, iON, Iso‐Flex, iTrend, JetStream, Lacquer Cure, LightTite, LoadermoveTouch, Maxima, Mesa, MicroDot, MicroFin,

MicroMax, MicroSpray, Mikros, MiniEdge, Minimeter, MiniPUR, Multifill, MultiScan, Myritex, Nano, OmniScan, OptiStroke, Optix,

Partnership+Plus, PatternJet, PCI, PharmaLok, PicoDot, PicoTouch, Pinnacle, PowderPilot, Powder Port, Powercure, Process Sentry,

Pulse Spray, PURBlue, PUReOne, PURJet, Qadence, Ready Coat, RediCoat, RollVIA, Royal Blue, SelectSeries, Sensomatic,

Shaftshield, SheetAire, Smart, Smart Tune, Smartfil, SolidBlue, Spectral, SpeedKing, Spray Works, StediTherm, StrokeControl, Summit,

SureFoam, SureMix, SureSeal, SwirlCoat, TAH, TradePlus, ThruCoat, ThruCure, ThruWave, Trio, TruFlow, Ultraflex, Ultrasaver,

Ultrasmart, Unity, UNITYMotion, Universal, Ultra FoamMix, UltraMax, ValueMate, Versa, VersaPUR, Vista, VP Quick Fit,

VP Quick‐Fit stylized, WaferLock, Web Cure, 781Mini, and 787Mini aretrademarks of NordsonCorporation.

Designations and trademarks stated in this document may be brands that, when used by third parties for their own purposes,

could lead to violation of the owners' rights.

Table of Contents i

Part 1127900_01

E 2019 Nordson Corporation

Table of Contents

Flexseam Dispensing System 1...............................

Safety 1......................................................

Safety Alert Symbols 1..........................................

Responsibilities of the Equipment Owner 2.........................

Safety Information 2..........................................

Instructions, Requirements, and Standards 2....................

User Qualifications 3.........................................

Applicable Industry Safety Practices 3............................

Intended Use of the Equipment 3...............................

Instructions and Safety Messages 4............................

Installation Practices 4........................................

Operating Practices 5........................................

Maintenance and Repair Practices 5...........................

Equipment Safety Information 6..................................

Equipment Shutdown 6.......................................

General Safety Warnings and Cautions 7........................

Other Safety Precautions 11....................................

First Aid 11...................................................

Safety Labels and Tags 12.......................................

Description 13.................................................

Intended Use 14................................................

Limitations of Use 14............................................

Additional Limitations of Using PUR Adhesives 14...................

Unit Identification 15.............................................

Key Components 16.............................................

Installation 17.................................................

Electro‐Magnetic Compliance Information 17........................

Experience of Installation Personnel 17.............................

Customer‐Supplied Installation Components 17.....................

Ship‐With Kit Contents 18........................................

Install the Applicator on the Robot 19...............................

Make the Air Supply Connections 20...............................

Connect Cables 22..............................................

Perform Initial System Power On 22................................

Operation 23..................................................

Special Operating Considerations for PUR Adhesive 23..............

Daily Start‐up and Operation 23...................................

Respond to Alarms 25...........................................

Place the System in Setback 25...................................

Monitor the System 25...........................................

Shutdown 25..................................................

Overnight Shutdown 25........................................

Long‐Term Shutdown 26.......................................

Table of Contents

Part 1127900_01

E 2019 Nordson Corporation

Maintenance 27................................................

Recommended Maintenance Schedule 27..........................

System Pressure Relief 28.......................................

Clean the Flexseam Module 29....................................

Disassemble and Clean the Module 29...........................

Assemble the Module 30.......................................

Troubleshooting 32............................................

General Troubleshooting 32......................................

Check the Applicator Heater 34...................................

Check the Applicator RTD 35.....................................

Parts 38.......................................................

Using the Illustrated Parts Lists 38.................................

Flexseam Dispensing System Assemblies 39.......................

Flexseam Slot Dispenser Applicator Parts 40........................

Flexseam Jetting Applicator 42....................................

Flexseam Module Body Parts 44..................................

Flexseam Pump Module 300CC Parts 46...........................

Nozzle Plate Module FS300 Parts 48...............................

Nozzle Plate SEPA Jettiing FS300 Parts 49.........................

Flexseam Module Package Parts 50...............................

Flexseam Ship‐with Kit 51........................................

Lip Part Numbers 52.............................................

Recommended Spare Parts and Supplies 53........................

Technical Data 54..............................................

Flexseam Dispensing System Specifications 54.....................