FlexSeam Dispensing System Customer Product Manual.pdf - 第5页
Flexseam Dispensing System 1 Part 1127900_01 E 2019 Nordson Corporation Flexseam Dispensing System Safety Read this section before using the equipment. This section contains recommendations and practices applicable to th…
Table of Contents
ii
Part 1127900_01
E 2019 Nordson Corporation
Maintenance 27................................................
Recommended Maintenance Schedule 27..........................
System Pressure Relief 28.......................................
Clean the Flexseam Module 29....................................
Disassemble and Clean the Module 29...........................
Assemble the Module 30.......................................
Troubleshooting 32............................................
General Troubleshooting 32......................................
Check the Applicator Heater 34...................................
Check the Applicator RTD 35.....................................
Parts 38.......................................................
Using the Illustrated Parts Lists 38.................................
Flexseam Dispensing System Assemblies 39.......................
Flexseam Slot Dispenser Applicator Parts 40........................
Flexseam Jetting Applicator 42....................................
Flexseam Module Body Parts 44..................................
Flexseam Pump Module 300CC Parts 46...........................
Nozzle Plate Module FS300 Parts 48...............................
Nozzle Plate SEPA Jettiing FS300 Parts 49.........................
Flexseam Module Package Parts 50...............................
Flexseam Ship‐with Kit 51........................................
Lip Part Numbers 52.............................................
Recommended Spare Parts and Supplies 53........................
Technical Data 54..............................................
Flexseam Dispensing System Specifications 54.....................
Flexseam Dispensing System
1
Part 1127900_01
E 2019 Nordson Corporation
Flexseam Dispensing System
Safety
Read this section before using the equipment. This section contains
recommendations and practices applicable to the safe installation, operation,
and maintenance (hereafter referred to as “use”) of the product described in
this document (hereafter referred to as “equipment”). Additional safety
information, in the form of task‐specific safety alert messages, appears as
appropriate throughout this document.
WARNING! Failure to follow the safety messages, recommendations, and
hazard avoidance procedures provided in this document can result in
personal injury, including death, or damage to equipment or property.
Safety Alert Symbols
The following safety alert symbol and signal words are used throughout this
document to alert the reader to personal safety hazards or to identify
conditions that may result in damage to equipment or property. Comply with
all safety information that follows the signal word.
WARNING! Indicates a potentially hazardous situation that, if not avoided,
can result in serious personal injury, including death.
CAUTION! Indicates a potentially hazardous situation that, if not avoided,
can result in minor or moderate personal injury.
CAUTION! (Used without the safety alert symbol) Indicates a potentially
hazardous situation that, if not avoided, can result in damage to equipment or
property.
Flexseam Dispensing System
2
Part 1127900_01
E 2019 Nordson Corporation
Responsibilities of the Equipment Owner
Equipment owners are responsible for managing safety information, ensuring
that all instructions and regulatory requirements for use of the equipment are
met, and for qualifying all potential users.
Safety Information
S Research and evaluate safety information from all applicable sources,
including the owner‐specific safety policy, best industry practices,
governing regulations, material manufacturer's product information, and
this document.
S Make safety information available to equipment users in accordance with
governing regulations. Contact the authority having jurisdiction for
information.
S Maintain safety information, including the safety labels affixed to the
equipment, in readable condition.
Instructions, Requirements, and Standards
S Ensure that the equipment is used in accordance with the information
provided in this document, governing codes and regulations, and best
industry practices.
S If applicable, receive approval from your facility's engineering or safety
department, or other similar function within your organization, before
installing or operating the equipment for the first time.
S Provide appropriate emergency and first aid equipment.
S Conduct safety inspections to ensure required practices are being
followed.
S Re‐evaluate safety practices and procedures whenever changes are
made to the process or equipment.