2OM-1751-003w_G5S.pdf - 第130页
2OM-1751 2-8 1303-001 2.4 Composition of Control Data The set parameters are used to set the automatic operation and PCB transfer control. Reference Refer to "3.4 Control" in Chapter 2, for the details of each …
2OM-1751
2-71303-001
C04 Set-up Data
Items Ref. No.
Conveyor C04_01
T2B7
C05 Support Pin Data
Items Ref. No.
Support Pin Set C05_01
Support Pin C05_02
The number of Pin using C05_03
Table C05_04
M-X, M-Y, Coord X, Coord Y C05_05
T2B8
2.3 Composition of Operation Data
2OM-1751
2-81303-001
2.4 Composition of Control Data
The set parameters are used to set the automatic operation and PCB transfer
control.
Reference
Refer to "3.4 Control" in Chapter 2, for the details of each item.
D01 Control Data
Items Ref. No.
Placement Mode D01_01
PCB Finishing Position D01_02
Pre-PL cmpnt thkns
PCB Top [mm], PCB Bottom [mm]
D01_03
PEC expansion correction D01_04
T2B9
D02 PCB Locate Data
Items Ref. No.
PCB detection off DLY D02_01
PCB Locate SET D02_02
PCB Locate Sequence D02_03
UP
MOVE
1st Speed DCLR SET
2nd Speed DCLR SET
Z Clamp
Opr. waiting time
Opr. ST DLY timer
D02_04
DN
MOVE
1st Speed DCLR SET
2nd Speed DCLR SET
Backup axis DN start DLY
D02_05
SW POSN of 1st / 2nd D02_06
Replace vacuum sensor D02_07
PCB position of contact D02_08
UP
MOVE
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Z clamp waiting time
D02_09
T2B10
2.4 Composition of Control Data
2OM-1751
2-91303-001
Items Ref. No.
DN
MOVE
1st speed DCLR SET
2nd speed DCLR SET
Vac. Ctrl. delayed starts
Vac. Wtg. Timer
Dama ged Vac. Wtg. time
Backup axis DN start DLY
D02_10
T2B11
D03 Transfer Speed Data
Items Ref. No.
Transportation speed SET D03_01
Transfer speed
Carrier, Stage inside, Output
D03_02
Input CNVR Y POSN ARR spd set-up D03_03
Output CNVR Y POSN ARR spd set-up D03_04
Component Deviation Control
Carrier, Stage inside, Output
D03_05
Control the stop position
Carrier, Positioning 1, Positioning 2, Output
D03_06
T2B12
2.4 Composition of Control Data