2OM-1751-003w_G5S.pdf - 第222页
2OM-1751 4-8 1303-001 [12] T est mode time Shown is the period of time during which test run was performed according to the test mode parameters. Note "W arm-up run time" is included. [13] W arm-up run time The…
2OM-1751
4-71303-001
Output wait
Shown is the period of time during which the machine was completely in
the waiting mode (the machine was waiting for a PCB to be unloaded to the
output machine).
PEC/BBR
Shown is the period of time during which the machine is taking PEC
recognition and BBR detection actions.
Counted is the period of time during which the X/Y table starts moving and
the PEC recognition and BBR detection are completed.
Others
Shown is the period of time during which the X/Y beam takes actions before
component placement, the X/Y table returns after component placement, etc.
Stop time
Shown is the period of time during which component placement operation
was interrupted for component replenishment, etc.
Error stop
Shown is the total time period when the machine is stopped due to a machine
error during the operation or standby.
Note
The time period of a machine error during maintenance or setup, except
for automatic operation, is not included.
Error alarm
Shown is the period of time during which an alarm (light tower ON) is
issued.
Recovery
Shown is the time between error cancellation and restart of machine
operation.
Maintenance time
Shown is the time period from pattern program change completion to
machine status turned to be "RUN"or "WAIT".
Feeder Reload
Shown is the machine stop time period from the occurrence of component
shortage to re-start of the machine.
Others
Shown is the time period during which the pattern program is changed or
machine idling operation is performed.
2.1 "Mach.Prfrm," Tab Sheet
2OM-1751
4-81303-001
[12]
Test mode time
Shown is the period of time during which test run was performed according
to the test mode parameters.
Note
"Warm-up run time" is included.
[13] Warm-up run time
The running time is counted when the machine is operated under the
following condition.
•
"TEST PATTERN" is enabled in the "Test Mode" window.
•
The "PCB Transfer Dsbl." check box is checked.
(State in which no PCB is put in and out)
[14]
"Mach.Prfrm," Tab Sheet (3/5) F2D5
[14] Tatal componets
No. of the pick-up operation times is displayed in this data box.
Total errs (A+B+C+G+L)/Total cmp ([%])
Shown are the total number of pickup errors, the total number of components
to be picked up, and the percentage of picked components per total number
of pickup errors.
A:comp.missing (% of Total err)
Shown are the number of component missing errors detected by the linear
measure detection sensor and the percentage of component missing errors
per total number of pickup errors.
2.1 "Mach.Prfrm," Tab Sheet
2OM-1751
4-91303-001
B:comp. missing (% of Total err)
Shown are the number of component missing errors detected in the
recognition process and the percentage of component missing errors per total
number of pickup errors.
C:comp. vertical (% of Total err)
Shown are the number of vertical component errors detected by the linear
measure detection sensor and the percentage of vertical component errors per
total number of pickup errors.
D:comp. recog (% of Total err)
Shown are the number of errors detected in the recognition process and the
percentage of errors per total number of pickup errors.
E:comp. thick (% of Total err)
Shown is the percentage of component thickness errors detected by the linear
measure detection sensor per total number of pickup errors.
F:pick-up difr. (% of Total err)
Shown are the number of pickup difference errors detected in the recognition
process and the percentage of the errors per total number of pickup errors.
G:comp. posture (% of Total err)
Shown are the number of reversed component and polarity judgment errors
detected in the recognition process and the percentage of the errors per total
number of pickup errors.
H:measur. err (% of Total err)
The measurement value error count and percentage to the total error count
are displayed in this data box.
K:coplanarity (% of Total err)
The percentage of error detected in the optional device installation, is
displayed in this data box.
L:obverse / reverse (% of Total err)
The percentage of the error times in the front/rear judgment using the linear
measure to the pick-up error total times, is displayed in this data box.
Total errors
Shown is the total number of component handling errors.
2.1 "Mach.Prfrm," Tab Sheet