5OM-1064-001.pdf - 第20页

Section 2 Adjustment of P .C.B. Positioning Section • The direction of the P .C.B. stopper block is adjusted in compliance with the setting upon shipment of the machine. When setting is changed, it is required to change …

Section 2

Adjustment of P.C.B. Positioning Section

9910-001 2-1 Tg0250-PM-MD

Section 2 Adjustment of P.C.B. Positioning Section

• The direction of the P.C.B. stopper block is adjusted in compliance with the

setting upon shipment of the machine.

When setting is changed, it is required to change the direction of the P.C.B.

stopper block according to the changed setting.

• See the figures depicted in “6.3 P.C.B. Transfer in Volume 1” for the direc-

tion of the P.C.B. stopper block.

Procedure for Direction Change of Stopper Block

(1) Move up the P.C.B. stopper and shut off the power supply.

Fig. 2.1

(2) Hold the cylinder rod with a wrench and remove the bolt fastening the

stopper block.

Fig. 2.2

(3) Change the direction of the stopper block by 180° and insert it into the

cylinder rod.

(4) Hold the cylinder rod with a wrench and tighten the bolt fastening the

stopper block.

Section 2 Adjustment of P.C.B. Positioning Section

0005-002 2-2 Tg0250-PM-MD

(5) Turn on the power and move down the P.C.B. stopper.

Fig. 2.3

0005-002 2-3 Tg0250-PM-MD

Section 2 Adjustment of P.C.B. Positioning Section