5OM-1064-001.pdf - 第28页
Items A D evice Inf ormation Messages B Remark s 0 5 H CLOSE THE COMPONENT SUPPLY COVE R [A] (B ACK S I DE) AN D PR ESS THE [READY [ A]] BUTT ON T O SET FEEDER [A] IN READY MODE. 06H CLO SE TH E SAF ETY B AR [A] (B ACK S…
2.2 List of Device Information Messages
Note: The ♦-marked items are optional.
Items A Device Information Messages B Remarks
01H WARNING:
DECREASING OF CMP.
HDLG RATE (FOR NOZ)
01H NOZZLE MESSAGE RATE :
02H WARNING:
DECREASING OF CMP.
HDLG RATE (FOR FDR)
01H FEEDER MESSAGE RATE :
01H CMP. MISSING (SENSOR)
02H CMP. VERTICAL (SENSOR)
03H CMP. MISSING (RECOG)
04H CMP. RECOG ERROR
03H ALTERNATED FEEDER
05H SHORTAGE OF COMPONENT
01H CMP. MISSING (SENSOR)
02H CMP. VERTICAL (SENSOR)
03H CMP. MISSING (RECOG)
04H CMP. RECOG ERROR
05H START AUTO
RECOVERY MODE
05H SHORTAGE OF COMPONENT
06H ALARM FOR
SHORTAGE OF CMP.
01H FEW COMPONENTS TO FEED.
01H FINISHED PRODUCT INTERVAL :
02H AUTO RUN INTERVAL :
08H PRODUCT
INFORMATION
03H NOZZLE USAGE INTERVAL :
09H MACHINE INTERFACE
SIGNAL
01H NO SIGNAL FROM FURNACE.
0AH PICK-UP ERROR 01H CMP. MISSING (SENSOR)
02H CMP. VERTICAL (SENSOR)
03H CMP. MISSING (RECOG)
04H CMP. RECOG ERROR (RECOG)
05H SHORTAGE OF COMPONENT
07H SHORTAGE OF COMPONENT
(ALTERNATED FDR)
01H FEEDER WAS NOT SEATED AT
BEAM-A SIDE (BACK).;BPH053
02H FEEDER WAS NOT SEATED AT
BEAM-A SIDE (BACK).;BPH054
0BH OPERATE
INFORMATION
03H FEEDER WAS NOT SEATED AT
BEAM-B SIDE (BACK).;BPH055
04H FEEDER WAS NOT SEATED AT
BEAM-B SIDE (BACK).;BPH056
0103-003 3-5 Tg0250-PM-MD
2. Management Information
Items A Device Information Messages B Remarks
05H CLOSE THE COMPONENT SUPPLY
COVER [A] (BACK SIDE) AND PRESS
THE [READY [A]] BUTTON TO SET
FEEDER [A] IN READY MODE.
06H CLOSE THE SAFETY BAR [A] (BACK
SIDE) AND PRESS THE [READY [A]]
BUTTON TO SET FEEDER [A] IN
READY MODE.
07H CLOSE THE COMPONENT SUPPLY
COVER [B] (FRONT SIDE) AND PRESS
THE [READY [B]] BUTTON TO SET
FEEDER [B] IN READY MODE.
08H CLOSE THE SAFETY BAR [B]
(FRONT SIDE) AND PRESS THE
[READY [B]] BUTTON TO SET
FEEDER [B] IN READY MODE.
09H REMOVE COMPONENT IN
COMPONENT REJECT BOX-A (BACK
SIDE) AND PRESS THE
READY [A]] BUTTON TO SET
FEEDER [A] IN READY MODE.
0BH OPERATE
INFORMATION
0AH REMOVE COMPONENT IN
COMPONENT REJECT BOX-B
(FRONT SIDE) AND PRESS THE
[READY [B]] BUTTON TO SET
FEEDER [B] IN READY MODE.
01H COMPONENT CARRIAGE DATA
EDIT: [X DIR.]ψOFF
0CH AUTOMATIC FEEDER
AXIS ADJUSTMENT
LIMIT SOFT
02H COMPONENT CARRIAGE DATA
EDIT: [Y DIR.]ψOFF
0103-003 3-6 Tg0250-PM-MD
2. Management Information
0103-003 3-7 Tg0250-PM-MD
2. Management Information