00194329-03.pdf - 第139页
Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 139 : Remove the protective plate over the X/Y -axis distributor (se e photogra ph). : Unplug all the connectors from the X/Y -…
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
138
: Loosen the screw on the plate beneath the clamp on the sector distributor, and remove the
cover.
2
: Detach the compressed air hoses from the sector distributor.
Note the correct positions and label the hoses.
2
: Unplug the ribbon cable from the gantry distributor board.
2
2
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
139
: Remove the protective plate over the X/Y-axis distributor (see photograph).
: Unplug all the connectors from the X/Y-axis distributor.
: Unscrew the X/Y axis distributor board.
: Loosen the screws shown in the picture.
2
2
2
2
2
2
2
2
2
Protective plate
Screws
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
140
: Gantry 2 + 4 only:
Also unscrew the partition plate.
2
: Loosen the single screw.
2
Loosen screw