00194329-03.pdf - 第144页

Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 144 : Loosen th e two screws used to screw the plate to the hoses/cables on th e gantry arm. Do not release the clamps . 2 : Lo…

100%1 / 198
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
143
: Loosen the screws in the clamp on the placement head.
2
: Detach the compressed air hoses on the placement head as follows:
HS-50: on the vacuum generator,
HS-60: on the clamp strip.
2
2 screws
HS-50
HS-60
Detach the hoses (HS-60)
Detach the hoses
(HS-50)
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
144
: Loosen the two screws used to screw the plate to the hoses/cables on the gantry arm. Do not
release the clamps.
2
: Loosen the screw in the cable and hose carrier beside the idler pulley.
2
2
The cable and hose carrier is now completely detached from the machine and can be removed.2
2
Screws
Loosen screw
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
145
2.2.7.5 Installing the cable and hose carrier
: Place the cable and hose carrier in the machine so that it is not damaged.
Fix it temporarily in position at suitable points.
: Screw the plate to which the cable and hose carrier is attached to the gantry arm.
2
2
: Screw on the cable and hose carrier beside the idler pulley (1 screw).
2
2
2
2
2
2 screws
Tighten the screw