00194329-03.pdf - 第181页
Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 181 : Run the cable and hose carrier as shown in the picture (see photograph) . : Plug the connectors o f the ribbon cab les in…
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
180
F machines: 2
: The distance between the outermost ribbon cable and the angle bracket shown in the picture
should be between 55 and 60 mm.
2
2
At the same time, the ribbon cable, nylon tape and compressed air hoses should each be between
0.5 mm and 1 mm apart from one another. 2
2
All machines 2
: Now fix the cable and hose carrier to the gantry arm using the clamps and check that the ribbon
cables, protective tape and air hoses are parallel when the placement head moves. Adjust if
required.
2
2
2
2
2
2
2
2
2
2
For distance between
mount and cable and
hose carrier
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
181
: Run the cable and hose carrier as shown in the picture (see photograph).
: Plug the connectors of the ribbon cables into the large axis conversion board.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Attach cables
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
182
: Use suitable tools to fix the cable and hose carrier in the cable and hose carrier mount and use
a cable tie to fix it to the power chain.
2
2
2
2
2
2
2
2
2
Cable ties