00194329-03.pdf - 第158页
Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 158 2.2.8 Cable and hose carrier on the SIPLACE S + F 2.2.8.1 Structure 2 2 2 2 2 2 2 2 1 Main gantry S-27 2 7-way hose, PK-3, …
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
157
: Screw the cable and hose carrier onto the sector distributor.
2
: Fix all the cables and hoses using cable ties.
Make sure that you do not squash any hoses or kink any cables.
: Check that the cables and hoses are laid correctly and do not rub against anything over the
entire traveling range of the X and Y axes.
To check this, move the gantry manually several times over the entire traveling range in the X
and Y directions.
2
: Switch on the placement machine.
: Start the SITEST program.
: Start a continuous run of the X or Y axis.
: Check again that the cable and hose carrier and hoses are laid correctly.
: Correct if necessary.
: Switch off the placement machine.
: Plug in the fan cable and fix the black cover plate.
2
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
158
2.2.8 Cable and hose carrier on the SIPLACE S + F
2.2.8.1 Structure
2
2
2
2
2
2
2
2
1 Main gantry S-27
2 7-way hose, PK-3, black 4M
3 Cover for X cable and hose carrier for 7-way hose
4 Power chain 80 S/G
5 Strain relief for Y cable and hose carrier mount S4
6 X cable clamp S4/F4
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
159
2
2
2
2
2
2
2
2
2
2
1 Main gantry S-27
2 Guide plate
3 Elastomeric spring 20*8.5*16 (90 SHORE A)
4 Distance light barrier
5 Scanning head, digital, Y axis
6 Sensor: Y axis end position
7 Sensor: Y axis end position