00195679-02_AI_XPS_DE+EN.pdf - 第61页
3 Assembly Instructions 1 Assembly Instr uctions SIPLACE X-Series Productivity S huttle T ype I/II 1.4 Abbreviations 1.4 Abbreviations DC Dual conveyor ESD Electrostatic sensitive devices EMC Electromagnetic compatibilit…
1 Assembly Instructions Assembly Instructions
1.3 Overview of Release Versions SIPLACE X-Series Productivity Shuttle Type I/II
2
The individual headings contain information on
– Our products
– Services
– Contacts, etc.
In addition, registered customers can access the SIPLACE User Group. There you can access
specific information on our products such as
– Technical documentation
– Technical information
– Spare parts lists, etc.
Registering to access the user group is simple:
z Click “Register Now”.
z Fill out the registration form and submit it.
You will soon thereafter receive an access authorization with a USER ID and password.
1.3 Overview of Release Versions
Instructions Software version Edition
First edition Assembly Instructions V 43.202 02/2008
3
Assembly Instructions 1 Assembly Instructions
SIPLACE X-Series Productivity Shuttle Type I/II 1.4 Abbreviations
1.4 Abbreviations
DC Dual conveyor
ESD Electrostatic sensitive devices
EMC Electromagnetic compatibility
ESD Electrostatic sensitive device
SC Single conveyor
GND Ground
IC Integrated circuit
PCB Printed-circuit board
MC Machine controller
SMD Surface-mounted device
WLAN Wireless local area network
XPL X-Series Productivity Lane
XPS X-Series Productivity Shuttle
1.5 Requirements
Assembly may only be performed by a service technician of Siemens AG. 1
– Station software SW 701 and Line Control SIPLACE Pro 5.1 or SW 605 and Line Control
SIPLACE Pro 5.0
– The fixed walls of the SIPLACE X-Series must be set to outside-outside position.
– The width of the SIPLACE X-Series must be se to 100 mm.
– Installation of the SIPLACE X-Series Productivity Lane
– Mounting of the SIPLACE X-Series Productivity Shuttle
– Setting up the system
1.5.1 Additional Documentation Required
– Operating instructions for the SIPLACE placement system
– Assembly instructions for the SIPLACE placement machine
– Operating instructions for the SIPLACE X-Series Productivity Shuttle
1 Assembly Instructions Assembly Instructions
1.6 Overview of Required Work Steps SIPLACE X-Series Productivity Shuttle Type I/II
4
1.5.2 Required Tools and Supplies
– Socket wrench set, 1/4” with bits, hexagon socket-head, sizes 2.5 mm, 3 mm, and 4 mm
– Open-end wrench, sizes 18 and 24
– Hexagon socket-head wrench set
– Precision spirit level
– Lift truck, if necessary
1.6 Overview of Required Work Steps
1. Removal of the lifting table plates in placement area 2 (BB2) of the SIPLACE X-Series.
2. Removal of the cover over the main distributor of the conveyor control for the SIPLACE X-
Series.
3. Preparation of the cable connection for the limit switch of the transport walls of the XPL.
4. Mounting of the cover over the main distributor of the conveyor control for the SIPLACE X-
Series.
5. Installation of the lifting table plates in placement area 2 (BB2) of the SIPLACE X-Series.
6. Installation of the SIPLACE X-Series Productivity Lane (XPL) in the SIPLACE X-Series.
7. Aligning the XPL.
8. Mounting of the SIPLACE X-Series Productivity Shuttle (XPS) upstream and downstream of
the SIPLACE X-Series.
9. Making the Interface Connections.