00195679-02_AI_XPS_DE+EN.pdf - 第63页

5 Assembly Instructions 1 Assembly Instr uctions SIPLACE X-Series Productivity Shuttl e T ype I/II 1.7 Safety Information 1.7 Safety Information DANGER The SIPLACE S tation and the XPS ar e electrically driven. Therefor …

1 Assembly Instructions Assembly Instructions

1.6 Overview of Required Work Steps SIPLACE X-Series Productivity Shuttle Type I/II

1.5.2 Required Tools and Supplies

– Socket wrench set, 1/4” with bits, hexagon socket-head, sizes 2.5 mm, 3 mm, and 4 mm

– Open-end wrench, sizes 18 and 24

– Hexagon socket-head wrench set

– Precision spirit level

– Lift truck, if necessary

1.6 Overview of Required Work Steps

1. Removal of the lifting table plates in placement area 2 (BB2) of the SIPLACE X-Series.

2. Removal of the cover over the main distributor of the conveyor control for the SIPLACE X-

Series.

3. Preparation of the cable connection for the limit switch of the transport walls of the XPL.

4. Mounting of the cover over the main distributor of the conveyor control for the SIPLACE X-

Series.

5. Installation of the lifting table plates in placement area 2 (BB2) of the SIPLACE X-Series.

6. Installation of the SIPLACE X-Series Productivity Lane (XPL) in the SIPLACE X-Series.

7. Aligning the XPL.

8. Mounting of the SIPLACE X-Series Productivity Shuttle (XPS) upstream and downstream of

the SIPLACE X-Series.

9. Making the Interface Connections.

Assembly Instructions 1 Assembly Instructions

SIPLACE X-Series Productivity Shuttle Type I/II 1.7 Safety Information

1.7 Safety Information

DANGER

The SIPLACE Station and the XPS are electrically driven. Therefore, parts of this equipment

conduct dangerous voltages – even when the main switch is switched off! Comply with all

applicable VDE, VDI, and VGB provisions.

Always switch off the main switches of the equipment and disconnect the equipment from the

power supply system if you are performing work on live parts. Failure to comply with any of these

notices can result in death, serious bodily injury, and/or significant property damage!

Comply with all accident prevention regulations and operating instructions applicable to operation

of the equipment. This applies, in particular, to the traversing ranges of lifting and feeding axes.

1 Assembly Instructions Assembly Instructions

1.7 Safety Information SIPLACE X-Series Productivity Shuttle Type I/II