Flexicut 英文操作说明书.pdf - 第25页

FL E XIC UT U se r' s G ui de Version 2 24  Cutting speed The Flexicut ben efits from 3 movable weights (50/100/2 5 0g), on the action arm, left hand side of the machine. Moving the weight along the arm will chan g…

FLEXICUT User's Guide

Version 2

How to use the arm

Before starting the cutting cycle (hood open), it is possible to move the arm equipped with a sample chuck,

in order to present the material to cut using the wheel in the required position.

 To move the arm from left to right or vice-versa, turn the wheel on the left hand side of

the machine. Move the wheel to locate the sample chuck on the desired cutting position.

 Press « 0.00 » to reset (zero) the position if a precise slice thickness is needed (after a

second cut)

A : Counterbalanced arm

B : Micrometric lateral movement wheel

 It is possible to set the arm position by unscrewing in « A », set the position, and tight

the screw when in position. This procedure allow you to set the end stroke of the arm.

FLEXICUT User's Guide

Version 2

 Cutting speed

The Flexicut benefits from 3 movable weights (50/100/250g), on the action arm, left hand side of the

machine. Moving the weight along the arm will change the load on the cut, and consequently, change the

cutting speed.

 The chucks and vices are mounted on the swinging arm.

 Move one weight onwards and one backwards, until you find the balance position

 When balanced, move the third weight onwards, to increase the load

 The load depends on the distance between the 2 front weight.

 Mount the cutting wheel and set the chuck position.

Set the balance between the front and back weight.

« A » (250g) must be placed behind the arm axis. »B” (100g), in front of the arm axis. “A” and “B” are used to

find the correct balance (the sample to cut must be on the arm). “C” (50g), is used to set a load on the arm.

The cutting speed will be linked to this load.

 Cutting cycle

FLEXICUT User's Guide

Version 2

When all the previous operations have been done, the hood must be closed. Then press “A” to start the cycle.

The FLEXICUT will automatically stop when the arm reaches the bottom position.

Movable table

Installing the table

To use the sliding table, you must first remove the arm by unscrewing « A ».

Then install the table and screw it with the 3 supplied screws.