Flexicut 英文操作说明书.pdf - 第4页

FL E XIC UT U se r' s G ui de Version 2 3 PRE SI machine maint enanc e In order t o maintain the perfor mance o f your machi ne, we suggest that y ou clean it on a regu lar basis (see below). Non-c ompliance with th…

FLEXICUT User's Guide

Version 2

You have just purchased a PRESI machine.

We thank you for the trust you have placed in us, and ask that you read

the instructions carefully in order to best use all of the functions that this

machine has to offer.

General points

PRESI designs, manufactures and markets machines and consumable items for the quality control of

materials.

PRESI has its own research department which allows it to design standard machines and consumable items

or on the contrary specific ones for a given customer.

Generally, special care is given to product and machine packaging and presentation.

These instructions were written for the purposes of being read, understood and followed in all aspects by

those responsible for and those that use the machine.

The complete technical documentation must always remain near the machine.

We recommend a very careful reading of these instructions for use before using your machine, as PRESI

cannot be held liable for any damage or breakdowns that occur due to not following these instructions.

It is very important that the person who is responsible for the machine read and understand these

instructions and in particular the chapters covering machine safety, cleaning and maintenance.

Note:

We reserve the right to change these instructions in order to take changes in technique and in regulations

into account.

FLEXICUT User's Guide

Version 2

PRESI machine maintenance

In order to maintain the performance of your machine, we suggest that you clean it on a regular basis (see

below). Non-compliance with this instruction can lead to material damage which cannot be covered by the

warranty.

The instructions for cleaning your machine are provided in the cleaning chapter of these instructions.

Daily cleaning

We recommend cleaning the machine's work area every day, as well as the filter of the pump tray if your

machine has one.

Likewise, the area around the machine must be kept in a suitably clean condition.

Weekly cleaning

A thorough cleaning of your machine every week is necessary in order to prevent any agglomerate of cut

material, dried mud or dust. Material agglomeration can result in material damage.

If your machine has one, you must check the pump tray. You must, first of all, check the general condition of

the filter, and clean it or replace it if necessary. The fluid level must also be checked; if the latter is too low

more fluid must be added in order to reach the recommended level. When adding fluid, use only PRESI rust

preventive additive prepared according to the product instructions.

Monthly maintenance

If your machine has a tray, you must empty it once a month and not forget to add PRESI rust preventive

additive the next time the machine is used

Non-use of the machine

If your machine has a cover, when it is not being used and when it contains a fluid, the machine must remain

with its cover open in order to prevent condensation from forming.

You can store the machine with its cover closed as long as it is drained of any fluid and dried beforehand.

Warranties

PRESI machines are guaranteed 1 year for parts and labour (except for wearing parts), transport to the

workshop, under normal conditions of use with PRESI brand products and in the framework of regular

maintenance. The warranty does not cover repair due to:

- incorrect use of a piece of equipment,

- normal wear of the machine and its components,

- lack of maintenance and/or upkeep,

- any intervention for which authorisation has not been obtained in writing from PRESI.

FLEXICUT User's Guide

Version 2

Safety

Signs in the instructions

Sign panels are placed in the instructions when there is a risk for the operator or of a deterioration of the

machine. These are qualified as follows:

Non-compliance with the indicator exposes the operator to a risk of serious injury. Comply

scrupulously with the rules that accompany this symbol.

DANGER

Non-compliance with this indicator can result in slight injury or material damage. Comply

scrupulously with the rules that accompany this symbol.

WARNING

This sign panel is present whenever a specific procedure concerning the use, instructions and

indicator lights is necessary as well as for any preventive operation on the machine.

PRECAUTION

Always comply with the instructions that accompany these signs. In addition to the safety rules issued in this

manual, it is important to always follow the general instructions concerning safety and accident prevention.

Signs affixed to the machine

A sign is attached to your machine if it has a residual risk or trapdoors that can still give access to a dangerous

area.

This pictogram indicates danger pertaining to electricity. The maintenance trapdoors that

give access to the machine's electronic and electrical components are indicated in this way.

This pictogram indicates a hot or burning area that is accessible.

This pictogram indicates a residual risk of crushing.