Flexicut 英文操作说明书.pdf - 第6页

FL E XIC UT U se r' s G ui de Version 2 5 This pictogram ind icates the use of a laser lig ht source. Basic safety instru ct i ons  Before an y maintenance operation, it must be made certain that no function of the…

FLEXICUT User's Guide

Version 2

Safety

Signs in the instructions

Sign panels are placed in the instructions when there is a risk for the operator or of a deterioration of the

machine. These are qualified as follows:

Non-compliance with the indicator exposes the operator to a risk of serious injury. Comply

scrupulously with the rules that accompany this symbol.

DANGER

Non-compliance with this indicator can result in slight injury or material damage. Comply

scrupulously with the rules that accompany this symbol.

WARNING

This sign panel is present whenever a specific procedure concerning the use, instructions and

indicator lights is necessary as well as for any preventive operation on the machine.

PRECAUTION

Always comply with the instructions that accompany these signs. In addition to the safety rules issued in this

manual, it is important to always follow the general instructions concerning safety and accident prevention.

Signs affixed to the machine

A sign is attached to your machine if it has a residual risk or trapdoors that can still give access to a dangerous

area.

This pictogram indicates danger pertaining to electricity. The maintenance trapdoors that

give access to the machine's electronic and electrical components are indicated in this way.

This pictogram indicates a hot or burning area that is accessible.

This pictogram indicates a residual risk of crushing.

FLEXICUT User's Guide

Version 2

This pictogram indicates the use of a laser light source.

Basic safety instructions

 Before any maintenance operation, it must be made certain that no function of the

machine can be activated inadvertently.

 Any intervention concerning the electrical system must be performed only by a

specialist.

 It is formally prohibited to remove or in any way deactivate a safety feature. If the

removable or deactivation is indispensable in order to perform a maintenance operation,

the latter must be put back into service as soon as the maintenance operation is complete.

 Any work on the electrical system must be performed by a specialist.

 Before opening the electrical cabinet, unplug the machine.

 Before manipulating the electrical or control system, unplug the machine.

 After any electrical intervention, check the earth.

 The machine's electrical equipment must be inspected on a regular basis. Defects such as bad

connections, exposed wires, etc. must be repaired immediately.

 The local standards in effect in the country of use must be complied with.

 Use only original fuses with the correct amperage.

 A PRESI machine must be used and maintained by authorised personnel who are

trained for this purpose. These people will have been informed of all of the possible risks.

 Responsibilities concerning the settings, use and maintenance of this machine must

be defined clearly with the purpose of preventing any inadequate manoeuvre.

 The employer must ensure that no unauthorised employee uses the machine.

 The operator has to check the machine at least once a day in order to ensure that no

outside damage has appeared. In the event of any notable change, he must inform the department

involved and/or PRESI after-sales service.

 The operator must make sure, according to the current rules and directives, that the environment around

the machine is clean and healthy.

 Use only PRESI approved and tested cut-off wheels.

WARNING

DANGER

FLEXICUT User's Guide

Version 2

Contents

GENERAL POINTS.............................................................................................................................. 2

PRESI MACHINE MAINTENANCE ................................................................................................ ........ 3

Daily cleaning ........................................................................................................................................................ 3

Weekly cleaning .................................................................................................................................................... 3

Monthly maintenance .......................................................................................................................................... 3

Non-use of the machine ....................................................................................................................................... 3

Warranties ............................................................................................................................................................ 3

SAFETY ............................................................................................................................................ 4

Signs in the instructions ........................................................................................................................................ 4

Signs affixed to the machine ................................................................................................................................. 4

Basic safety instructions ....................................................................................................................................... 5

CONTENTS ....................................................................................................................................... 6

GENERAL DESCRIPTION ..................................................................................................................... 8

The Flexicut accepts abrasive, CBN & diamond wheels from 75mm to 200 mm diameter. ................................ 9

TECHNICAL CHARACTERISTICS ......................................................................................................................... 9

CUTTING CAPACITY .......................................................................................................................... 9

Without stage ..................................................................................................................................................... 10

With forward movement stage for PCB Cuts ...................................................................................................... 10

With fixed stage for PCB cuts .............................................................................................................................. 10

SETTING UP THE MACHINE .......................................................................................................11

MISCELLANEOUS INFORMATION .............................................................................................14

Instructions concerning vibrations ..................................................................................................................... 14

Instructions concerning noise ............................................................................................................................. 14

Instructions concerning personal protective equipment ................................................................................... 14

Instructions concerning the transport of the machine ....................................................................................... 14

Instructions concerning storage ......................................................................................................................... 14

OPERATIONS ...............................................................................................................................15

GENERAL INFORMATION .............................................................................................................................. 15