Flexicut 英文 操作说明书.pdf - 第33页
FL E XIC UT U se r' s G ui de Version 2 32 Cleaning Machine performan ce and longevit y is dependent on your cleaning and maintenanc e regimes. It is recommended that th e machine is cleaned o n a regul ar basis. …
FLEXICUT User's Guide
Version 2
31
Cutting the part
Press on « A » to start the cycle, and move manually your part onward. Press the part firmly onto the cutting
table. When the cut is complete manually stop the machine by pressing again “A”.
A
FLEXICUT User's Guide
Version 2
32
Cleaning
Machine performance and longevity is dependent on your cleaning and maintenance regimes. It is
recommended that the machine is cleaned on a regular basis.
Daily
Remove the tables, select and press “cleaning”, and use the coolant hose to wash down the machine.
Press “A” to activate the cleaning mode. Move the spray nozzle around the blade location
Monthly
Deep clean the machine, and check the coolant tank. If needed, empty the fluid and renew it. You can either
open the dump valve on the machine back or connect a hose to the coolant nozzle and activate the cleaning
function
When renewing the fluid, it is needed to prime the pump again. It can be easily done by using the Jet-Pur
aerosol.
Keep the coolant nozzle down, and the aerosol straight (air position)
Turn the pump on, 2 to 3 seconds later, trigger the aerosol
Repeat this operation until the coolant flow starts.
A
FLEXICUT User's Guide
Version 2
33
MAINTENANCE
1. Proceed with regular cleaning of the machine.
2. Add the PRESI rust preventive additive each time water is added (using a different additive can
damage the machine and compromise the warranty).
USEFUL CONTACTS
PRESI SA
11 rue du vercors
38320 Eybens, France
Tel.: +33 (0)4 76 72 00 21
Fax. : +33 (0)4 76 72 05 84
Quality department: qualite@presi.com or quality@presi.com
After-sales service: sav@presi.com or aftersales@presi.com
Discover our subsidiaries on www.presi.com