00196449-04_UM_FCCS_digital_DE_EN.pdf - 第69页

4 Camera Calibration in Stations from SW705.03 4.5 Calibration sequence in SW 7xx.xx Operating Manual / Bedienungsanleitung Camera Calibration FCCS digital Kamerakalibrierung FCCS digital 04/2020 69 4.5 Calibration seque…

4 Camera Calibration in Stations from SW705.03

4.4 FCCS in placement line from SW 709.xx

68 Operating Manual / Bedienungsanleitung Camera Calibration FCCS digital Kamerakalibrierung FCCS digital 04/2020

Fig.27: Camera verification

ü You have opened the "Verification" view.

► Select Camera verification in the Verific-

ation view.

ð Pass-through is not guaranteed.

Fig.28: Skip check for soiling of all cameras

► Only select cameras on the machine at

which you want to perform the measure-

ment by clicking on the respective check

box and entering a tick in it. (For the ma-

chines of the stations at which you do not

want to perform measurements, i.e. the

tray will only be passed through, you do

not need to select these machines.)

► Click Next.

ð The dialog "Ensure preconditions are

fulfilled before continuing" is displayed

(as in the case of the other stations).

► Remove the tick at Skip check for soiling

of all cameras.

Fig.29: Start

► Click on Start.

ð The tray moving in will now be directly

transported through the machine as no

camera has been selected for measure-

ment.

4 Camera Calibration in Stations from SW705.03

4.5 Calibration sequence in SW 7xx.xx

Operating Manual / Bedienungsanleitung Camera Calibration FCCS digital Kamerakalibrierung FCCS digital 04/2020 69

4.5 Calibration sequence in SW 7xx.xx

Fig.30: Select the cameras to be calibrated

► Select the cameras to be calibrated.

●

The nozzle types displayed in the column

must be available at the head and in the

nozzle changer. From 712.1 onwards and

when using the FCCS tool "03047943S04

camera calibration plate FCCS digital +",

the camera soiling will be checked before

the cameras are calibrated.

NOTICE

Is it possible to check the degree of soiling?

If an older FCCS tray is inserted, which does not have any pockets for the contrast stand-

ards, the software will recognize this, will not perform soiling checks and will omit this func-

tion without issuing an error message.

Fig.31: Starting conditions

► Before pressing the Start button make

sure that all pre-requisites mentioned

below are met.

Fig.32: All support pins removed from the lifting table

► Confirm that all conveyor pins have been

removed by selecting the All pins

removed from lifting table (top right) but-

ton.

► Now insert the camera calibration tray into

conveyor lane 1.

ð The calibration process will start auto-

matically after the tray has been

clamped in the placement area.

4 Camera Calibration in Stations from SW705.03

4.5 Calibration sequence in SW 7xx.xx

70 Operating Manual / Bedienungsanleitung Camera Calibration FCCS digital Kamerakalibrierung FCCS digital 04/2020

Fig.33: Save and exit

●

The camera soiling will be checked first.

●

• If the degree of camera soiling is more

than 66%, the function will be stopped with

an error message and the FCCS measure-

ments will not be started.

●

When the calibration is completed the

status will be displayed.

●

With the "Save&Exit" button the data will

be written into the cameras and you can

display the result in a file.

Error message 38423, camera soiled, "Camera is soiled and needs cleaning,camera: xx"

• If the degree of soiling is found to be tolerable, the software will automatically continue with FCCS

calibration. A (graphical) display with the degree of camera contamination will not be shown here

but can be seen later as a percentage in the FCCS report.

• The "Save&Exit" button only writes the FCCS calibration data to the cameras.

NOTICE

Cleaning the SIPLACE Vision camera system

The procedure for cleaning the SIPLACE Vision camera system is described in the tech-

nical information TI2014-10D09.pdf in German and in the TI2014-10E09.pdf file in English.